HobbydexDIN 6799: E-clips (E-type retaining rings for shafts)
Current edition 06/2017, superseding 04/2011 and 09/1981. Each size is named by its nominal groove diameter (groove_mm); the shaft range is the 04/2011 block of the same page, the outer diameter and thickness are the same in both editions. The page writes the shaft ranges with strict inequalities (2.5 < d1 < 5); the ends are read as fitting. Sizes 10 and 12 to 30 have no spec in data/specs/eclip yet (no shaft of 11 mm or more is there).
- Publisher's page
- fasten.it (title, scope, edition; the text is sold)
Sizes (22)
| Spec | Shaft mm | Thickness mm | Outer mm | Matching parts |
|---|---|---|---|---|
| 1mm E-clip, 0.2mm thick, 3mm outer | 1 | 0.2 | 3 | 1 |
| 1.2mm E-clip | 1.2 | 3 | ||
| 1.5mm E-clip | 1.5 | 8 | ||
| 1.9mm E-clip | 1.9 | 1 | ||
| 2mm E-clip | 2 | 20 | ||
| 2.3mm E-clip | 2.3 | 10 | ||
| 2.5mm E-clip | 2.5 | 34 | ||
| 3mm E-clip | 3 | 24 | ||
| 3mm E-clip, 0.6mm thick | 3 | 0.6 | 1 | |
| 3.175mm E-clip | 3.175 | 2 | ||
| 3.2mm E-clip | 3.2 | 8 | ||
| 3.2mm E-clip, 0.6mm thick | 3.2 | 0.6 | 2 | |
| 3.5mm E-clip | 3.5 | 2 | ||
| 4mm E-clip | 4 | 37 | ||
| 4mm E-clip, 0.6mm thick | 4 | 0.6 | 1 | |
| 4.5mm E-clip | 4.5 | 1 | ||
| 5mm E-clip | 5 | 19 | ||
| 6mm E-clip | 6 | 8 | ||
| 7mm E-clip | 7 | 13 | ||
| 8mm E-clip | 8 | 10 | ||
| 9mm E-clip | 9 | 2 | ||
| 10mm E-clip | 10 | 2 |