Hobbydex30136 · RSx3-one10 Ver.D Lite-R
- Brand
- KO Propo
- Part number
- 30136
- Category
- Servos · more from KO Propo
- Size
- 40.5 x 21 x 26.5 mm
- Weight
- 42.1 g
- Servo
- 8.2 kg/cm, 0.08 s/60° at 7.4 V, coreless, metal gears
- Notes
- End of production (KO Propo product page). KO Propo specifications: Torque: 8.2Kg-cm Speed: 0.08sec/60deg(@7.4V); Torque: 7.0Kg-cm Speed: 0.09sec/60deg(@6.0V); Dimensions: 40.5×26.5×21mm (Low Profile); Weight: 42.1g; Operating voltage: 6.0～7.4V (Lipo,Life,Ni-MH); Aluminum final Gear; inside gear by brass (some by plastic); Core-less motor; Dual ball bearings; The aluminum heat sink middle case; Gold plated connector; HCS Compatible; Recommended category; 1/10 Electric Drift car
Documents
- KO Propo RSx3 / BSx3 Series Manual
- KO Propo Servo Fitting Chart (Servo-Lineup-2022-05-EN.pdf)
- KO Propo Servo Fitting Chart (Servo-Lineup-2021-09-EN.pdf)
Equivalent to
| Generic spec | Match | Standards | Source |
|---|---|---|---|
| Low profile servo | functional | Size class from KO Propo's page; spline not stated; check the mounting holes |
Similar servos · same size class, closest torque and speed · compare all servos
- KO Propo 30120 RSx-one10 Type-S · 8.2 kg·cm · 0.08 s/60° at 7.4 V
- KO Propo 30134 RSx3-one10 Ver.D Lite · 8.2 kg·cm · 0.08 s/60° at 7.4 V
- Futaba S-C400 · 8 kg·cm · 0.08 s/60° at 7.4 V
- Futaba S9570SV (Low Profile, S.Bus2) · 8 kg·cm · 0.08 s/60° at 7.4 V
- Savox SC-1251MG+ Low Profile Digital Coreless Metal Gear Servo · 9 kg·cm · 0.09 s/60° at 6 V
- KO Propo 30105 RSx-one10 Response · 9 kg·cm · 0.07 s/60° at 7.4 V
- Sanwa ERS-971 · 9.2 kg·cm · 0.09 s/60° at 6 V
- Sanwa SDX-801 · 6.4 kg·cm · 0.08 s/60° at 6 V
Used in
No release lists this part yet.
Compatibility according to the manufacturer's parts lists; see each release for the source document.