Hobbydex30131 · RSx3-one10 Ver.D discontinued
Source: KO Propo.
- Brand
- KO Propo
- Part number
- 30131
- Source
- KO Propo RSx3 / BSx3 Series Manual · KO Propo Servo Fitting Chart (Servo-Lineup-2022-05-EN.pdf) · KO Propo Servo Fitting Chart (Servo-Lineup-2021-09-EN.pdf)
- Category
- Servos · more from KO Propo
- Product page
- manufacturer website
- Accessories
- 35563 Metal Gear set for RSx3-one10 Ver.D
- Size
- 40.5 x 21 x 26.5 mm
- Weight
- 48 g
- Servo
- 8.2 kg/cm, 0.08 s/60° at 7.4 V, coreless, metal gears
- Bearings
- 2 ball bearings
- Spec
- Low profile servo
- Size class
- low-profile
- Modified
- 2026-10-19
End of production (KO Propo product page). KO Propo specifications: Torque: 8.2Kg-cm Speed: 0.08sec/60deg(@7.4V); Torque: 7.0Kg-cm Speed: 0.09sec/60deg(@6.0V); Dimensions: 40.5×26.5×21mm (Low Profile); Weight: 48.0g; Operating voltage: 6.0～7.4V (Lipo,Life,Ni-MH); The hard alumite aluminum gear; Core-less motor; Dual ball bearings; The hard servo gear shaft; The aluminum top case; The aluminum heat sink middle case; Black cable; Gold plated connector; HCS Compatible; Recommend category; 1/10 EP on road DRIFT Car
Equivalent to
| Generic spec | Match | Standards | Source |
|---|---|---|---|
| Low profile servo | functional | Size class from KO Propo's page; spline not stated; check the mounting holes |
Similar servos · same size class, closest torque and speed · compare all servos
- KO Propo 30120 RSx-one10 Type-S discontinued · 8.2 kg·cm · 0.08 s/60° at 7.4 V
- KO Propo 30134 RSx3-one10 Ver.D Lite discontinued · 8.2 kg·cm · 0.08 s/60° at 7.4 V
- KO Propo 30136 RSx3-one10 Ver.D Lite-R discontinued · 8.2 kg·cm · 0.08 s/60° at 7.4 V
- Futaba S-C400 · 8 kg·cm · 0.08 s/60° at 7.4 V
- Futaba S9570SV (Low Profile, S.Bus2) · 8 kg·cm · 0.08 s/60° at 7.4 V
- Savox SC-1251MG+ Low Profile Digital Coreless Metal Gear Servo · 9 kg·cm · 0.09 s/60° at 6 V
- KO Propo 30105 RSx-one10 Response discontinued · 9 kg·cm · 0.07 s/60° at 7.4 V
- KO Propo 30125 RSx3-one10 Response discontinued · 9 kg·cm · 0.07 s/60° at 7.4 V
Used in
No release lists this part yet.
Data: 30131.toml on GitHub · report an error