Hobbydex / RC cars / specs / nut / m4-nylon-lock-thin

M4 thin nylon insert lock nut

Category
nut
thread
M4
type
nylon-lock
profile
thin
across flats mm
7
notes
Across flats 7 mm: the ISO 272 hex size for M4, the same in ISO 4032, ISO 4035, ISO 10511, DIN 934, DIN 439 and DIN 985. Height 5 mm (DIN 985 / ISO 10511, the low form); RC low-profile aluminium nuts are often lower still
Standards
DIN 985, ISO 10511
5.2*7M4 thin nylon insert lock nutdimensions in mm
Drawn to the sizes the spec gives; sizes from DIN 985. * not fixed by the spec: drawn with the usual proportions for this type. The nylon ring is shaded.

Branded parts matching this spec (1)

BrandNumberNamePackMaterialMatch
WEDICO31082-WSTOPPMUTTER M4 DIN 985exact

Used in (via those parts)

No release lists a matching part yet.

Derived by walking release, part and equivalence links; the material is a property of each branded part, not of the spec.

Data: m4-nylon-lock-thin.toml on GitHub · suggest a correction · report a problem