Hobbydex / RC cars / Specs / Connectors / jst-xh-6

JST-XH 6-pin (5S balance)

Category: Connectors
Family: JST
Pins: 6
Anti spark: no
Polarized: yes
Pitch (mm): 2.5 (source)
Notes: 2.5 mm pitch balance lead for a pack of 5 cells (pins = cells + 1).
Modified: 2026-10-24

To scale: JST's XH connector catalogue (eXH.pdf), housing XHP-6: 17.3 wide (2.5 x 5 + 4.8), 5.7 deep, 7.5 high plus a 0.25 step, contacts at 2.5 pitch, in mm; the guide notches, cavities and lock ribs are read off the drawing. The two lock ribs on one long side fit the slots in the header's wall, so the plug goes in one way round; the bar marks circuit 1.

Branded parts matching this spec (0)

None linked yet.

Batteries with this balance plug (4)

Brand	Number	Name	Cells	Balance plug	Main plug
Gens ace	GEA58005S60X9	5800mAh 5S 60C 18.5V Lipo Battery \| XT90 Plug	5	JST-XH usual for LiPo packs; not stated by the maker	XT90
Turnigy	9067110035	5S 5000mAh 18.5V 40C Lipo Battery Pack w/XT90	5	JST-XH usual for LiPo packs; not stated by the maker	XT90
Turnigy	9067110046	Heavy Duty 5S 3600mAh 18.5V 60C Lipo Battery Pack w/XT90	5	JST-XH usual for LiPo packs; not stated by the maker	XT90
Turnigy	9067160600	5S 4000mAh 18.5V 40C Lipo Battery Pack w/XT90	5	JST-XH usual for LiPo packs; not stated by the maker	XT90

Used in (via those parts)

No release lists a matching part yet.

Derived by walking release, part and equivalence links; the material is a property of each branded part, not of the spec.

Data: jst-xh-6.toml on GitHub · report an error