Hobbydex30218 · BSx4S-one10 Grasper2 DRIFT SPEC
- Brand
- KO Propo
- Part number
- 30218
- Category
- Servos · more from KO Propo
- Size
- 40.5 x 21 x 26 mm
- Weight
- 51 g
- Servo
- 16 kg/cm, 0.09 s/60° at 7.4 V, brushless, metal gears
- Notes
- End of production (KO Propo product page). KO Propo specifications: Maximum Torque: 16.0Kg-cm Maximum Speed: 0.09sec/60deg(@7.4V); Maximum Torque: 12.1Kg-cm Maximum Speed: 0.11sec/60deg(@6.0V); Dimensions: 40.5×26×21mm (Low Profile); Weight: 51.0g; Servo Lead: 180mm; Operating voltage: 6.0～7.4V (Lipo, Life, Ni-MH); Brush-less motor; Hard alumite aluminum gear; Dual ball bearings; Hard servo gear shaft; Aluminum top case; Aluminum heat sink middle case; Black cable; Gold plated connector; Serial Compatible; HCS Compatible; Recommend category; 1/10 EP Drift car
Documents
- KO Propo BSx4S Series Manual
- KO Propo Servo Fitting Chart (Servo-Lineup-2022-05-EN.pdf)
- KO Propo Servo Fitting Chart (Servo-Lineup-2021-09-EN.pdf)
Equivalent to
| Generic spec | Match | Standards | Source |
|---|---|---|---|
| Low profile servo | functional | Size class from KO Propo's page; spline not stated; check the mounting holes |
Similar servos · same size class, closest torque and speed · compare all servos
- Sanwa PGS-LH · 15.6 kg·cm · 0.09 s/60° at 7.4 V
- Sanwa PGS-LH-II PGS-LH II · 15.6 kg·cm · 0.09 s/60° at 7.4 V
- Sanwa PGS-LH-TYPE-D PGS-LH TYPE-D · 15.6 kg·cm · 0.09 s/60° at 7.4 V
- Sanwa PGS-CL · 16.6 kg·cm · 0.08 s/60° at 7.4 V
- Sanwa PGS-CL-II PGS-CL II · 16.6 kg·cm · 0.08 s/60° at 7.4 V
- Power HD D15 High Voltage Servo · 18 kg·cm · 0.085 s/60° at 8.4 V
- KO Propo 30206 BSx2-one10 Power · 17.8 kg·cm · 0.1 s/60° at 7.4 V
- KO Propo 30213 BSx3-one10 Power · 17.8 kg·cm · 0.1 s/60° at 7.4 V
Used in
No release lists this part yet.
Compatibility according to the manufacturer's parts lists; see each release for the source document.