Traxxas

Country: US
Website: https://traxxas.com
Status: active

Model numbers like 67464-4; part numbers are 4 digits with letter or colour suffixes (6736-BLK, 5119A).

Kits

Rustler 4X4
1/10 4wd stadium-truck
Slash 2WD
1/10 2wd short-course
Slash 4X4
1/10 4wd short-course
Stampede 4X4
1/10 4wd monster
TRX-4
1/10 4wd crawler
X-Maxx
1/5 4wd monster

Parts (1607)

Number	Name	Pack
1548	1548
1552	Motor screws (3x8mm hex cap) (6)/washers (6)/ wrench
1589	Double-sided adhesive tape (25mm x 25mm)
1633	E-clips/ C-rings
1654	Wheel hubs, hex (rear) (2)/ stub axle pins	2
1654R	Wheel hubs, hex (steel) (2)/ axle pins	2
1654X	Wheel hubs, hex (blue-anodized, lightweight aluminum) (2)/ axle pins	2
1664	Shock shafts, steel, chrome finish (long)	2
1664T	Shock shafts, hardened steel, titanium nitride coated (long)	2
1726	Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer	1
1726A	Antenna, tube, black (1)/ vinyl antenna cap (1)/ wire retainer	1
1747	Nuts, 4mm nylon locking	10
1747A	Nuts, aluminum, flanged, serrated (4mm) (red-anodized)	4
1747G	Nuts, aluminum, flanged, serrated (4mm) (green-anodized)	4
1747P	Nuts, 4mm flanged nylon locking (aluminum, pink anodized)	4
1747R	Nuts, aluminum, flanged, serrated (4mm) (blue-anodized)	4
1747T	Nuts, aluminum, flanged, serrated (4mm) (orange- anodized)	4
1748	Nuts, 4mm nylon locking, black	10
1765	Silicone diaphragms	4
1834	Body Clips (12) (standard size)
1834A	Body clips, black (12) (standard size)
1926	Antenna caps, vinyl (2)/ antenna spool
1935	Turnbuckles, 36mm	2
1942	Rod ends (16 long & 4 short)/ hollow ball connectors (18)/ ball screws	2
1985	PTFE-coated Washers, 5x8x0.5mm (20) (use with ball bearings)
2053	Gear set (for 2055, 2056 servos)
2056	Servo, high-torque, waterproof (blue case)
2057	Servo, metal gear, waterproof
2059	Gear set, metal (for 2057 servos)
2063A	Servo case/gaskets (for 2065A waterproof sub-micro servo)
2063R	Servo case/gaskets (for 2065R metal gear, waterproof, sub-micro servo)
2063X	Servo case/gaskets (for 2065X metal gear, waterproof, sub-micro servo)
2064A	Gear set (for 2065A waterproof sub-micro servo)
2064R	Gear set, metal (for 2065R waterproof sub-micro servo)
2065	2065
2065A	Servo, sub-micro, waterproof
2065R	Servo, sub-micro, waterproof, metal gear
2072A	Gear set (for 2070, 2075 servos)
2072R	Gear set, metal, high-speed (for 2070, 2075 servos)
2072X	Gear set, metal (for 2070, 2075 servos)
2074	Servo case/gaskets (for 2056 and 2075 waterproof servos)
2075	Servo, digital high-torque (ball bearing), waterproof
2075R	Servo, digital high-speed, metal gear (ball bearing), waterproof
2075X	Servo, digital high-torque, metal gear (ball bearing), waterproof
2085RL	Servo, digital high-torque/high-speed, metal gear (ball bearing), waterproof
2086	Servo case/gaskets (for 2085, 2085L, 2085R, 2085RL, 2085X & 2085XL servos)
2087X	Gear set, metal (for 2085, 2085X, 2085XL servos)
2250	Servo, digital high-torque 330 coreless, metal gear (ball bearing), waterproof
2251	Servo case, plastic (top, middle, bottom)/ gaskets/ hardware (for 2250, 2255 servos)
2252	Gear set, metal (for 2250, 2255 servos)
2253	Servo case, aluminum (middle) (red-anodized) (for 2255 servo)
2254	Servo case, aluminum (middle) (blue-anodized) (for 2250 servo)
2255	Servo, digital high-torque 400 brushless, metal gear (ball bearing), waterproof
2260	BEC assembly (complete) (12.6 volts (3s LiPo) maximum input voltage)
2261	Y-harness, BEC TRX-4® Scale and Trail® Crawler with 1972 Chevrolet® Blazer Body: 4WD Electric Truck with TQi System
2262	BEC, complete (12.6 volts (3s LiPo) maximum input voltage) (includes receiver box cover and seals)
2263	Y-harness, BEC to LED light set
2265	Servo, sub-micro, high-torque, waterproof, metal gear
2270	Servo, digital high-torque, metal gear (ball bearing), waterproof
2271	Servo case/ gaskets (for 2270 waterproof servo)
2272	Gear set, metal (for 2270 waterproof servo)
2280	Servo, digital high-torque 600 brushless, metal gear (ball bearing), waterproof
2285	2285
2287	Gear set, metal (for 2280 servo)
2295	2295
2362	Shock rebuild kit (for 2 shocks)
2380R	Differential, complete (fits 1/10-scale 2WD Rustler®, Bandit®, Stampede®, Slash®)
2381X	Main diff with steel ring gear/ side cover plate/ screws (Bandit®, Stampede®, Rustler®)
2382R	Planet gears (4)/ planet shafts (4)/ sun gears (2)/sun gear alignment shaft (1) (all hardened steel)
2388R	Planetary gear differential with steel ring gear (complete) (fits Bandit®, Stampede®, Rustler®)
2503	2503
2514	Decal sheet, racing sponsors
2516	2516
2523	Screws, 2.5x10 countersunk machine (hex drive)	6
2524	Screws, 2.5x8 countersunk machine (hex drive)	6
2530-BLK	Bulkhead (front) (black)
2530-GRAY	Bulkhead (front) (gray)
2532-GRAY	Tie bar, steel
2534	Screws, 3x6mm countersunk machine (6) (hex drive)
2535	Screws, 4x10mm countersunk machine (hex drive)	6
2537	3mm threaded rods (includes 1 each of 20mm, 25mm & 44mm)
2542	Screws, 4x12mm countersunk machine (hex drive)	6
2545	Bushings (plastic) (5x8x2.5mm)	4
2546	Screws, 4x15mm countersunk machine (hex drive)	6
2550	2550
2551	2551
2552	Screws, 3x12mm countersunk machine (6) (hex drive)
2554	Screws, 3x6mm caphead machine (hex drive)	6
2555A	Suspension arms, blue, rear, heavy duty	2
2555G	Suspension arms, green, rear, heavy duty	2
2555R	Suspension arms, red, rear, heavy duty	2
2555T	Suspension arms, orange, rear, heavy duty	2
2555X	Suspension arms, black, rear, heavy duty	2
2564	Screws, 2x8mm cap-head machine (hex drive)	6
2571	2571
2575	Screws, 3x6mm button-head machine (hex drive)	6
2576	Screws, 3x8mm button-head machine (hex drive)	6
2577	Screws, 3x10mm button-head machine (hex drive)	6
2578	Screws, 3x12mm button-head machine (hex drive)	6
2579	Screws, 3x15mm button-head machine (hex drive)	6
2580	Screws, 3x20mm button-head machine (hex drive)	6
2581	Screws, 3x25mm button-head machine (hex drive)	6
2582	Screws, 3x30mm button-head machine (hex drive)	6
2583	Screws, 3x18 button-head machine (hex drive)	6
2584	Head screws, 3x12mm cap-head machine (hex drive) (6) (TRX® 2.5, 2.5R, 3.3)
2585	Screws, 3x20mm cap-head machine (hex drive)	6
2586	Screws, 3x15mm cap-head machine (hex drive)	6
2587	Screws, 3x10mm caphead machine (6) (no washer)
2591	Screws, 3x23mm button-head machine (hex drive)	6
2592	Screws, 3x40mm button-head machine (hex drive)	6
2593	Screws, 3x14mm button-head machine (hex drive)	6
2594	Screws, 4x15mm button-head machine (hex drive)	6
2595	Screws, 4x35mm button-head machine (hex drive)	6
2596	Screws, 4x25mm button-head machine (hex drive)	6
2597	Screws, 4x22mm button-head machine (hex drive)	6
2598X	Screws, 4x30mm button-head machine (hex drive)	6
2616	Screws, 3x27mm button-head machine (hex drive)	6
2617	Screws, 2.5x8mm button-head machine (hex drive)	6
2618	Screws, 2.5x16mm cap-head machine	6
2640	Suspension pins, 44mm (2) w/ E-clips
2656	Shock shafts, steel, chrome finish (xx-long)	2
2656T	Shock shafts, hardened steel, titanium nitride coated (xx- long)	2
2660	Big-bore shocks (long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs	2
2662	Big-bore shocks (xx-long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (rear)	2
2667	Shock caps, aluminum (2) (Big Bore Shocks)
2668	Spring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks)
2669	Piston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings & washers (2) (Big Bore Shocks)
2728	Ball bearings (5x8x2.5mm)	2
2742	Rod ends, long (6)/ hollow ball connectors	6
2742X	Rod ends, short (6)/ hollow balls	6
2743	Set (grub) screws, 3mm hardened	12
2745	Nuts, 3mm nylon locking	12
2746	Washers, 3x6mm metal	12
2748R	Tool set (includes 1.5mm hex wrench / 2.0mm hex wrench / 2.5mm hex wrench/ 4-way wrench/ 8mm & 4mm wrench/ U-joint wrench)
2754	Stub axle pins	4
2820X	2200mah 7.4v 2-Cell 25C LiPo Battery
2823X	1400mah 11.1v 3-Cell 25C LiPo Battery
2827X	3000mah 7.4v 2-Cell LiPo Battery
2832X	5000mah 11.1v 3-Cell 25C LiPo Battery
2842X	5000mah 7.4v 2-Cell 25C LiPo Battery
2843X	5800mah 7.4v 2-Cell 25C LiPo Battery
2844R	5200mAh 7.4v 2-cell 35C LiPo Battery
2849X	4000mah 11.1v 3-Cell 25C LiPo Battery
2857X	6400mah 11.1v 3-Cell 25C LiPo Battery
2869X	7600mah 7.4v 2-Cell 25C LiPo Battery
2872X	5000mah 11.1v 3-Cell 25C LiPo Battery
2889X	5000mah 14.8v 4-Cell 25C LiPo Battery (long)
2890X	6700mah 14.8v 4-Cell 25C LiPo Battery
2912	Power adapter, AC, USB-C (45W) (110 volt, North America only)
2914	Battery, Power Cell AA Alkaline	4
2916	Power cable, USB-C, 100W (high output), 5 ft. (1.5m)
2922X	3000mAh 7.2V 6-cell flat NiMH Battery, Power Cell
2923X	3000mAh 8.4V 7-cell flat NiMH Battery, Power Cell
2938X	Adapter, Traxxas® iD® LiPo battery (adapts Traxxas® iD® batteries to separate balance ports)
2940X	3300mAh 8.4V 7-cell flat NiMH Battery, Series 3 Power Cell
2942X	3300mAh 7.2V 6-cell flat NiMH Battery, Series 3 Power Cell
2943	Battery charge indicators, green (4), grey (4), blue	4
2950X	4200mAh 8.4V 7-cell flat NiMH Battery, Series 4 Power Cell
2952X	4200mAh 7.2V 6-cell flat NiMH Battery, Series 4 Power Cell
2960X	5000mAh 8.4V 7-cell flat NiMH Battery, Series 5 Power Cell
2968	LiPo cell voltage checker/balancer (requires #2938X adapter for Traxxas® iD® batteries)
2968X	LiPo cell voltage checker/balancer (includes #2938X adapter for Traxxas® iD® batteries)
2969	Charger, AC, 2 amp NiMH peak detecting (5-7 cell, 6.0-8.4 volt, NiMH only)
2970	Charger, EZ-Peak Plus, 4 amp, NiMH/LiPo with iD Auto Battery Identification
2970-2SR	Battery/charger completer pack (includes #2970 iD® charger (1), #2844R 5200mAh 7.4V 2-cell 35C LiPo iD® Battery (1))
2970-3S	Battery/charger completer pack (includes #2970 iD® charger (1), #2872X 5000mAh 11.1V 3-cell 25C LiPo iD® Battery (1))
2971	EZ-Peak Live 12-amp NiMH/LiPo Fast Charger with iD® Auto Battery Identification and Bluetooth®
2972	Charger, EZ-Peak Live Dual, 100W, NiMH/ LiPo with ID Auto Battery Identification
2973	Charger, EZ-Peak Live Dual, 200W, NiMH/ LiPo with ID Auto Battery Identification
2975	Charger, D/C, 4 amp (6 - 7 cell, 7.2 - 8.4 volt, NiMH)
2976	AC to DC adapter
2978	Fuse, D/C charger, 5A (2) (for #2974, 2975, 2977)
2981	Charger, EZ-Peak® Plus 4s, 8 amp, NiMH/LiPo with iD® Auto Battery Identification
2982	Charger, USB-C, 40W (6 - 7 cell, 7.2 - 8.4 volt, NiMH) (with iD®)
2983	Battery/charger completer pack (includes #2969 2-amp NiMH peak detecting AC charger (1), #2923X 3000mAh 8.4V 7-cell NiMH iD® battery (1))
2985	Charger, EZ-Peak®, USB-C, 40W, NiMH/LiPo with iD® Auto Battery Identification
2985-2S	Battery/charger completer pack (includes #2985 charger (1), #2827X 3000mAh 7.4V 2-cell 20C LiPo iD® Battery (1))
2985-3S	Battery/charger completer pack (includes #2985 charger (1), #2872X 5000mAh 11.1V 3-cell 25C LiPo iD® Battery (1))
2990	Battery/charger completer pack (includes #2972 Dual iD® charger (1), #2872X 5000mAh 11.1V 3-cell 25C LiPo iD® Battery (2))
2991	Battery/charger completer pack (includes #2972 Dual iD® charger (1), #2869X 7600mAh 7.4V 2-cell 25C LiPo iD® Battery (2))
2992	Battery/charger completer pack (includes #2970 iD® charger (1), #2843X 5800mAh 7.4V 2-cell 25C LiPo iD® Battery (1))
2994	Battery/charger completer pack (includes #2970 iD® charger (1), #2849X 4000mAh 11.1v 3-Cell 25C LiPo iD® battery (1))
2996X	Battery/charger completer pack (includes #2971 iD® charger (1), #2889X 5000 mAh 14.8V 4-cell 25C LiPo battery (1))
2997	Battery/charger completer pack (includes #2973 Dual iD® charger (1), #2890X 6700mAh 14.8V 4-cell 25C LiPo iD® Battery (2))
3025	XL-5HV 3s Electronic Speed Control, waterproof (low-voltage detection, fwd/rev/brake)
3139A	Turnbuckles, aluminum (blue-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
3139G	Turnbuckles, aluminum (green-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
3139P	Turnbuckles, aluminum (pink-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
3139T	Turnbuckles, aluminum (orange-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
3139X	Turnbuckles, aluminum (red-anodized), toe links, 59mm (2) (assembled with rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
3195	Top drive gear, steel (22-tooth)
3215	Screws, 2.5x6mm cap-head machine (hex drive)	6
3229	Screws, 2.5x10mm cap-head machine (hex drive)	6
3234	Screws, 2.5x14mm cap-head machine (hex drive)	6
3236	Screws, 2.5x12mm cap-head machine	6
3340	Cooling fan, electronic speed control, Velineon® VXL-3s, VXL-4s or BL-2s®
3347	Screws, 2.5x5mm button-head machine (hex drive)	6
3350R	Velineon® VXL-3s Brushless Power System, waterproof (includes VXL-3s waterproof ESC , Velineon® 3500 motor, and speed control mounting plate (part #3725)) Radio System, Batteries & Chargers
3362	Heat sink, Velineon® 1200XL
3415	Tool set with pouch (includes 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4mm drivers/4mm. 5mm, 5.5mm, 7mm, and 8mm nut drivers/ 2mm, 3mm, and 4mm slotted screwdrivers/ #00 Phillips, #0 Phillips, and #1 Phillips screwdrivers/ 4mm and 8mm wrenches/ driver handle)
3425	Rubber pit mat, 16x24x0.28
3426	Rubber pit mat, 36x20
3431	Scissors, straight tip
3432	Scissors, curved tip
3433	Body reamer (plastic handle)
3433X	Body reamer (aluminum handle)
3436	Cap, body reamer
3441	Velineon® VX3 ™ Brushless Power System, waterproof (includes VX3
3442	Motor, V3200 ™ , brushless
3446	Velineon® VX3 ™ Electronic Speed Control, waterproof (brushless) (fwd/rev/brake)
3467-BLUE	Cooling fan, electronic speed control, Velineon® VX3 ™ (blue)
3467-GRAY	Cooling fan, electronic speed control, Velineon® VX3 ™ (gray)
3474	Dual cooling fan kit (with shroud), Velineon® 1200XL motor
3475	Cooling fan, Velineon® VXL ESC (fits VXL-6s & VXL-8s)
3491	Motor, Velineon® 1200XL, brushless
3492	Rebuild kit, Velineon® 1200XL (includes plastic endbells (2), 6x17x6mm ball bearings (2), 6x8x.3 washer (1), 6x8x1 washer (1), 7x6x12 spacer (1))
3628	Box, receiver (sealed)/ foam pad/2.5x8mm CS (4)/ 3x10mm CS	2
3629	Seal kit, receiver box (includes o-ring, seals, and silicone grease) Shock tower, rear (black) (fits Bandit® series)
3631A	Suspension arms, blue, front, heavy duty	2
3631G	Suspension arms, green, front, heavy duty	2
3631R	Suspension arms, red, front, heavy duty	2
3631T	Suspension arms, orange, front, heavy duty	2
3631X	Suspension arms, black, front, heavy duty	2
3632A	Caster blocks, 30-degree, blue-anodized 6061-T6 aluminum (left & right)/ suspension screw pin	2
3632G	Caster blocks, 30-degree, green-anodized 6061-T6 aluminum (left & right)/ suspension screw pin	2
3632P	Caster blocks, 30-degree, pink-anodized 6061-T6 aluminum (left & right)/ suspension screw pin	2
3632T	Caster blocks, 30-degree, orange-anodized 6061-T6 aluminum (left & right)/ suspension screw pin	2
3632X	Caster blocks, 30-degree, red-anodized 6061-T6 aluminum (left & right)/ suspension screw pin	2
3636A	Steering blocks, Rustler®/Stampede®/Bandit® (2), 6061- T6 aluminum (blue-anodized)/ 5x11mm ball bearings	4
3636G	Steering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (green-anodized)/ 5x11mm ball bearings	4
3636P	Steering blocks, Rustler®/Stampede®/Bandit® (2), 6061- T6 aluminum (pink-anodized)/ 5x11mm ball bearings	4
3636T	Steering blocks, Rustler®/Stampede®/Bandit® (2), 6061- T6 aluminum (orange-anodized)/ 5x11mm ball bearings	4
3636X	Steering blocks, Rustler®/Stampede®/Bandit® (2), 6061- T6 aluminum (red-anodized)/ 5x11mm ball bearings	4
3637	Axles (front)	2
3638-BLK	Shock tower, rear (black) (for clipless body mounting)
3642X	Shoulder screws, Ultra Shocks (3x12 hex drive)	6
3643	Turnbuckles, camber link, 49mm (82mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
3643G	Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than Titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
3643R	Camber links, front (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
3643X	Camber links, front (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
3644	Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right) (fits front & rear on Slash)
3644-GRAY	Turnbuckles, camber link, 39mm (steel) (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
3644G	Camber links, rear (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
3644R	Camber links, rear (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
3644X	Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
3646	Screws, 3x15mm flat-head machine (hex drive)	6
3647	Nuts, 4mm flanged nylon locking (steel, serrated)	8
3652A	Stub axle carriers, Rustler®/Stampede®/Bandit® (2), 6061- T6 aluminum (blue-anodized)/ 5x11mm ball bearings	4
3652G	Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061- T6 aluminum (green-anodized)/ 5x11mm ball bearings	4
3652P	Stub axle carriers, Rustler®/Stampede®/Bandit® (2), 6061- T6 aluminum (pink-anodized)/ 5x11mm ball bearings	4
3652T	Stub axle carriers, Rustler®/Stampede®/Bandit® (2), 6061- T6 aluminum (orange-anodized)/ 5x11mm ball bearings	4
3652X	Stub axle carriers, Rustler®/Stampede®/Bandit® (2), 6061- T6 aluminum (red-anodized)/ 5x11mm ball bearings	4
3654	Wheel hubs, hex (front) (tall offset) (2)/ axle pins (2.5x10mm)	2
3655-BLK	Suspension arms, black, front/rear (left & right), heavy duty	2
3655-BLUE	Suspension arms, blue, front/rear (left & right), heavy duty	2
3655-GRN	Suspension arms, green, front/rear (left & right), heavy duty	2
3655-ORNG	Suspension arms, orange, front/rear (left & right), heavy duty	2
3655-RED	Suspension arms, red, front/rear (left & right), heavy duty	2
3665	Tires & wheels, assembled, glued (satin chrome wheels, Terra Groove dual profile tires, foam inserts) (nitro rear/ electric front)	2
3665X	Tires & wheels, assembled, glued (chrome wheels, Terra Groove dual profile tires, foam inserts) (nitro rear/ electric front)	2
3669	Tires & wheels, assembled, glued (2.8") (All-Star chrome wheels, Talon tires, foam inserts) (nitro rear/electric front)	2
3669A	Tires & wheels, assembled, glued (2.8") (All-Star black chrome wheels, Talon tires, foam inserts) (nitro rear/electric front) (2) (TSM® rated)
3677-BLK	Wheelie bar mount (1)/ hardware (fits Stampede®, Rustler®, Bandit® series)
3677-BLUE	Wheelie bar mount (1)/ hardware (blue) (fits Stampede®, Rustler®, Bandit® series)
3677-GRN	Wheelie bar mount (1)/ hardware (green) (fits Stampede®, Rustler®, Bandit® series)
3677-PINK	Wheelie bar mount (1)/ hardware (pink) (fits Stampede®, Rustler®, Bandit® series)
3678-BLK	Wheelie bar, assembled (black, adjustable) (fits Slash®, Stampede®, Rustler®, Bandit® series)
3678-BLUE	Wheelie bar, assembled (blue, adjustable) (fits Slash®, Stampede®, Rustler®, Bandit® series)
3678-GRN	Wheelie bar, assembled (green, adjustable) (fits Slash®, Stampede®, Rustler®, Bandit® series)
3678-ORNG	Wheelie bar, assembled (orange, adjustable) (fits Slash®, Stampede®, Rustler®, Bandit® series)
3678-PINK	Wheelie bar, assembled (pink, adjustable) (fits Slash, Stampede®, Rustler®, Bandit® series)
3678-RED	Wheelie bar, assembled (red, adjustable) (fits Slash®, Stampede®, Rustler®, Bandit® series)
3690	LED light bar, front (assembled)/ 3x8 BCS (2)/ 2.5x8 BCS (2) (requires front bumper #5835X for 2WD Slash®, #3635 for 2WD Stampede®, #3630 for 2WD Bigfoot® No. 1, #6835X for 4WD Slash®, or #6735 for 4WD Stampede®)
3691-BLK	Gearbox halves (left & right) (black) w/ idler gear shaft
3691-GRAY	Gearbox halves (left & right) (gray) w/ idler gear shaft
3695X	Transmission, complete (fits 1/10-scale 2WD Rustler®, Bandit®, Stampede®, Slash®) (includes 76T, 83T, and 86T spur gears (48-pitch)) Bandit®, Rustler®, Stampede®, Slash®) (includes 54T and 56T spur gears (32-pitch))
3696	Idler gear, steel (30-tooth)
3698	Access plug, rubber (receiver box)
3737	Turnbuckle, aluminum (red-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/hollow balls (2)(See part 3741X for complete camber link set)
3737A	Turnbuckle, aluminum (blue-anodized), camber link, front, 39mm (1)(assembled w/rod ends)/hollow balls (2)(See part 3741A for complete camber link set)
3739	Screw pin set (Rustler®/ Bandit®/ Stampede®)
3742	Shoulder screws, steering bellcranks (3x30mm cap-head machine) (2)/ draglink shoulder screws (chrome)	2
3745	Turnbuckles, toe link, 59mm (78mm center to center) (2) (assembled with rod ends and hollow balls)
3745-GRAY	Turnbuckles, toe link, 59mm (steel) (78mm center to center) (assembled with rod ends and hollow balls) (2) If you have questions or need technical assistance, call Traxxas at: For orders, calls outside the U.S., and other information, call 972-549-3000,
3759	Springs, front	2
3790	Gear adapter, fixed
3792	Cover, gear/ rubber gear cover plug/ 3x6 RM	2
3793	Input shaft (slipper shaft) / spring pin
3917	Gear, 15-T pinion (32-pitch) (fits 3mm shaft)/ set screw
3919	Gear, 12-T pinion (32-pitch)/ set screw
3931	Screws, 3x8mm flat-head machine (hex drive)	6
3932	Screws, 3x6mm flat-head machine (hex drive)	6
3933	Screws, 4x16mm button-head machine (hex drive)	6
3934	Body clips, heavy duty	12
3934A	Body clips, heavy duty (black)	12
3935	Body clip (mounting clip), angled, 90-degrees	10
3935A	Body clip (mounting clip), angled, 90-degrees (black)	10
3936	Screws, 4x10mm button-head machine (hex drive)	6
3937	Screws, 4x12mm button-head machine (hex drive)	6
3938	Screws, 4x14mm button-head machine (hex drive)	6
3942X	Gear, 12-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
3943X	Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
3944X	Gear, 14-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
3945X	Gear, 15-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
3946X	Gear, 16-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
3947X	Gear, 17-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
3948X	Gear, 18-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
3949X	Gear, 19-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
3950X	Gear, 20-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
3951X	Gear, 21-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
3952X	Gear, 22-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
3956	Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch)
3956R	Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential)
3956X	Spur gear, steel, 54-tooth (0.8 metric pitch, compatible with 32- pitch) (for center differential)
3965	Screws, 2.5x8mm cap-head machine	6
3975R	Motor, Titan 550, reverse rotation (21-turns/ 14 volts)	1
4175	Tires & wheels, assembled, glued (2.8") (All-Star black chrome wheels, paddle tires, foam inserts) (nitro rear/electric front) (2) (TSM® rated)
4611	Ball bearings (5x11x4mm)	2
4857	Screw, 3x20 countersunk machine (hex drive)	6
4859	CS 3x10 flathead (hex drive)
4897X	Screws, set (grub), 4mm (with heavy duty threadlock)	6
4915	Body washers, foam adhesive	10
4955	Pins, axle (2.5x12mm)	4
5029	Shock oil bottle (60cc) (for mixing shock oil)
5031	Oil, shock (20 wt, 200 cSt, 60cc) (silicone)
5032	Oil, shock (30 wt, 350 cSt, 60cc) (silicone)
5033	Oil, shock (40 wt, 500 cSt, 60cc) (silicone)
5034	Oil, shock (50 wt, 600 cSt, 60cc) (silicone)
5035	Oil, shock (60 wt, 700 cSt, 60cc) (silicone)
5036	Oil, shock (70 wt, 900 cSt, 60cc) (silicone)
5037	Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone)
5038	Spinning carousel rack
5038X	Shock oil set (includes 20 wt, 30 wt, 40 wt, 50 wt, 60 wt, 70 wt, & 80 wt premium shock oils with spinning carousel rack)
5039	Oil, differential (500K wt) (0.7 oz (20cc))
5040	Oil, differential (20M wt) (standard)
5041	Grease, premium high performance (20cc)
5045	Grease, ultra high performance (30cc)
5099	5099
5102A	Ball bearings, black rubber sealed (15x21x4mm)	2
5103A	Ball bearings, black rubber sealed (7x14x5mm)	2
5104A	Ball bearings, black rubber sealed (4x10x4mm)	2
5106	Ball Bearing, blue rubber sealed (15x24x5)	2
5106A	Ball bearing, black rubber sealed (15x24x5mm)	2
5107A	Ball Bearing, black rubber sealed (17x26x5)	2
5108A	Ball Bearing, black rubber sealed (15x26x5)	2
5114	Ball bearings, blue rubber shield (5x8x2.5mm)	2
5114A	Ball bearings, black rubber sealed (5x8x2.5mm)	2
5115A	Ball bearings, black rubber sealed (5x10x4mm)	2
5116	Ball bearings, blue rubber sealed (5x11x4mm)	2
5116A	Ball bearings, black rubber sealed (5x11x4mm)	2
5117	Ball bearings, blue rubber sealed (6x12x4mm)	2
5117A	Ball bearings, black rubber sealed (6x12x4mm)	2
5118	Ball bearings, blue rubber sealed (8x16x5mm)	2
5119	Ball bearings, blue rubber sealed (10x15x4mm)	2
5119A	Ball bearings, black rubber sealed (10x15x4mm)	2
5120	Ball bearings, blue rubber sealed (12x18x4mm)	2
5120A	Ball bearings, black rubber sealed (12x18x4mm)	2
5130	Oil, differential (100K wt) (0.7 oz (20cc))
5136	Oil, differential (30K wt) (1.7 oz (50cc))
5136X	Differential oil kit (1.7 oz (50cc) of 1 each: 10K, 30K, 50K weights)
5158	Nuts, 2.5mm nylon locking	12
5169	Screws, 2.6x8mm countersunk machine (6) (EZ Start 2 motor)
5180A	Ball bearings, black rubber sealed (6x13x5mm)	2
5186	Wheels, aluminum (red-anodized) (2)/ 5x8mm ball bearings (4)/ axles (2)/ rubber tires	2
5186A	Wheels, aluminum (blue-anodized) (2)/ 5x8mm ball bearings (4)/ axles (2)/ rubber tires	2
5196A	Ball bearing, black rubber sealed (20x32x7mm)	2
5196X	Ball bearing, black rubber sealed, stainless (20x32x7mm)	2
5347	Rod ends, Revo® (large) with hollow balls	12
5349	5349
5353	Wheel nuts, splined, 17mm (blue-anodized)	4
5355	Hollow ball, tall centered (2)/ tall offset hollow ball (2)/ bump steer adjustment shims; 3.5mm (2), 1.17mm	2
5379R	Ring gear, differential/ pinion gear, differential (machined, spiral cut) (front)
5379X	Ring gear, differential/ pinion gear, differential
5381	Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 6x10x0.5 TW
5452X	U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm headed pin (4)/ 4x15mm screw pin (2)/ hex pin (2)/ e-clips (10)/ 3x6x0.5 MW (8)) (metal parts for 2 driveshafts)
5462	Rebuild kit, GTR shock (x-rings, bump stops, bladders, all pistons, piston nuts, shock rod ends) renews 2 shocks
5469	Rod ends (GTR shocks)
5474	Flat wrench, 10mm (black anodized aluminum)
5475	Multi-tool (plastic)
5476X	Hex wrenches; 1.5mm, 2mm, 2.5mm, 3mm, 2.5 ball
5480X	Wheel wrench, splined, 17mm
5525	Rod ends (12)/ hollow balls	12
5529	Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured	4
5539	Turnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2) 1-888-TRAXXAS or fax to 972-549-3011 e-mail Traxxas at support@Traxxas.com
5552A	Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1))
5556	Slipper pressure plate & hub (aluminum alloy)
5640	Gear, 14-T pinion (0.8 metric pitch, compatible with 32- pitch) (hardened steel) (fits 5mm shaft)/ set screw
5641	Gear, 11-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
5642	Gear, 13-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
5643	Gear, 17-T pinion (0.8 metric pitch, compatible with 32- pitch) (fits 5mm shaft)/ set screw
5644	Gear, 18-T pinion (0.8 metric pitch, compatible with 32-pitch) (hardened steel) (fits 5mm shaft)/ set screw
5646	Gear, 20-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
5651	Gear, 15-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
5652	Gear, 16-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
5669	Servo horn (with built-in spring and hardware) (for Summit locking differential)
5813	Decal Sheet, Slash
5831-BLK	Lower chassis, low CG (black) (requires #5832-BLK, 5832- BLUE, 5832-DGRY, or 5832-STGRY chassis)
5831-BLUE	Lower chassis, low CG (blue) (requires #5832-BLK, 5832- BLUE, 5832-DGRY, or 5832-STGRY chassis)
5831-DGRY	Lower chassis, low CG (charcoal gray) (requires #5832- BLK, 5832-BLUE, 5832-DGRY, or 5832-STGRY chassis) 5832-BLUE, 5832-DGRY or 5832-STGRY chassis)
5832-BLK	Chassis, low CG (black) (requires #5831-BLK, 5831-BLUE, 5831-DGRY or 5831-STGRY lower chassis)
5832-BLUE	Chassis, low CG (blue) (requires #5831-BLK, 5831-BLUE, 5831-DGRY or 5831-STGRY lower chassis)
5832-DGRY	Chassis, low CG (charcoal gray) (requires #5831-BLK, 5831-BLUE, 5831-DGRY or 5831-STGRY lower chassis) BLUE, 5831-DGRY or 5831-STGRY lower chassis)
5833	Nerf bars, low CG (black)
5833A	Nerf bars, low CG (blue)
5833G	Nerf bars, low CG (grey)
5836	Bumper, rear/ bumper mount, rear (black)
5836P	Bumper, rear/ bumper mount, rear (pink)
5848-RNR	Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD), Rock n' Roll (painted, decals applied) (assembled with front & rear latches for clipless mounting)
5850-ORNG	Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD), orange (painted, decals applied) (assembled with front & rear latches for clipless mounting)
5851-PINK	Body, Slash® 2WD (also fits Slash® VXL & Slash® 4X4), pink & purple (painted, decals applied) (assembled with front & rear latches for clipless mounting)
5853X	Wheel hubs, splined, 17mm, short (2), long (2) (blue- anodized) / wheel nuts, splined, 17mm (blue-anodized) (4)/ hub retainer M4 X 0.7 (4)/ axle pin (4) (Slash 2WD)
5854	Hub retainer, 17mm hubs, M4 X 0.7 (4) (use with #5853X, #6856X, #6469)
5855	Body, Slash® 2WD, ProGraphix® (also fits Slash® VXL & Slash® 4X4) (graphics are printed, requires paint & final color application)/ decal sheet
5855X	Body, Slash® 4X4, ProGraphix® (also fits Slash® VXL & Slash® 2WD) (graphics are printed, requires paint & final color application)/ decal sheet
5859	Springs, rear (white) (progressive rate) (2) (for Slash big bore shocks)
5860	Springs, front (white) (progressive rate) (2) (for Slash big bore shocks)
5862	Big Bore shocks (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts and springs) (front & rear)	4
5863	Tire & wheel assy, glued (SCT, black, orange beadlock wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
5863R	Tire & wheel assembled, glued (S1 compound) (SCT, black, orange beadlock wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
5864	Tire & wheel assy, glued (SCT, black, orange beadlock wheels, SCT off-road racing tires, foam inserts) (2) (2WD Front)
5865	Tire & wheel assy, glued (SCT, chrome, green beadlock wheel, BFGoodrich® Mud-Terrain inserts) (2) (2WD front only)
5867A	Tires & wheels, assembled, glued (SCT chrome, blue beadlock style wheels, BFGoodrich® Mud-Terrain KM2 tires, foam inserts) (2) (4WD front/rear, 2WD rear only)
5868	Wheels, SCT chrome, red beadlock style, dual profile (2.2" outer 3.0" inner) (2) (4WD front/rear, 2WD rear only)
5868A	Wheels, SCT chrome, blue beadlock style, dual profile (2.2" outer 3.0" inner) (2) (4WD front/rear, 2WD rear only)
5868X	Wheels, SCT, black, orange beadlock style, dual profile (2.2" outer 3.0" inner) (4WD f/r, 2WD rear)	2
5869	Tire & wheel assy, glued (SCT chrome, red beadlock style wheels, BFGoodrich® Mud-Terrain foam inserts) (2) (2WD front)
5869A	Tires & wheels, assembled, glued (SCT chrome, blue beadlock style wheels, BFGoodrich® Mud-Terrain KM2 tires, foam inserts) (2) (2WD front)
5870A	Wheels, SCT chrome, blue beadlock style, dual profile (2.2” outer, 3.0” inner) (2) (2WD front only)
5870X	Wheels, SCT, black, orange beadlock style, dual profile (2.2" outer 3.0" inner) (2WD front)	2
5871R	Tires, Ultra soft, S1 compound for off-road racing, SCT dual profile 4.3x1.7- 2.2/3.0" (2)/ foam inserts	2
5872	Wheels, SCT satin chrome, beadlock style, dual profile (2.2" outer 3.0" inner) (2) (Rear)
5872X	Wheels, SCT satin chrome, black beadlock style, dual profile (2.2" outer 3.0" inner) (2) (4WD front/rear, 2WD rear only)
5873	Tires & wheels, assembled, glued (SCT, satin chrome wheels, beadlock type (dual profile 2.2" outer 3.0" inner), SCT off-road tires, foam inserts) (2) (Rear) (TSM® rated)
5873A	Tires & wheels, assembled, glued (SCT, satin chrome wheels, red beadlock, (dual profile 2.2" outer 3.0" inner), SCT off-road tires, foam inserts) (2) (Rear)
5873R	Tires & wheels, assembled, glued (SCT, satin chrome, red beadlock wheels, ultra soft S1 compound off-road racing tires, foam inserts) (2) (2WD Rear, 4WD F/R)
5873X	Tire & wheel assy, glued (SCTsatin chrome, black beadlock style wheels, SCT off-road racing tires, foam inserts) (2) (4WD front/rear, 2WD rear only)
5874	Wheels, SCT satin chrome, beadlock style, dual profile (2.2" outer 3.0" inner) (2) (Front)
5874A	Wheels, SCT satin chrome, red beadlock style, dual profile (2.2" outer 3.0" inner) (Front)	2
5875	Tires & wheels, assembled, glued (SCT, satin chrome wheels, beadlock type (dual profile 2.2" outer 3.0" inner), SCT off-road tires, foam inserts) (2) (Front)
5875X	Tire & wheel assy, glued (SCT satin chrome, black beadlock style wheels, SCT off-road racing tires, foam inserts) (2) (2WD front)
5876	Wheels, SCT Split-Spoke, satin chrome, black beadlock style, dual profile (2.2" outer 3.0" inner) (2WD front)	2
5877	Tire & wheel assy, glued (SCT Split-Spoke, satin, black beadlock wheel, BFGoodrich® Mud-Terrain tire, foam inserts) (2) (2WD Front)
5877A	Tire & wheel assy, glued (SCT Split-Spoke, chrome red beadlock wheels, BFGoodrich® Mud-Terrain tires, inserts) (2) (2WD Front)
5877R	Tire & wheel assy, glued (S1 compound) (SCT Split- Spoke, chrome red beadlock wheel, BFGoodrich® Mud- Terrain
5878	Tire & wheel assy, glued (SCT satin chrome, black beadlock wheel, BFGoodrich® Mud-Terrain tire, insert) (2)(4WD front/rear, 2WD rear only)
5878-BLK	Tire & wheel assy, glued (SCT black beadlock wheels, BFGoodrich® Mud-Terrain (2) (4WD front/rear, 2WD rear only)
5879-BLK	Tire & wheel assy, glued (SCT black beadlock style wheels, BFGoodrich® Mud-Terrain inserts) (2) (2WD front)
5880	Tire & wheel assy, glued (SCT satin chrome, black beadlock style wheels, Kumho tires, foam inserts) (2) (4WD front/rear, 2WD rear only)
5880X	Tire & wheel assy, glued (SCT satin chrome, beadlock style wheels, Kumho tires, foam inserts) (2) (4WD front/rear, 2WD rear only)
5881	Tire & wheel assy, glued (SCT satin chrome, black beadlock style wheels, Kumho tires, foam inserts) (2) (2WD front)
5881X	Tire & wheel assy, glued (SCT satin chrome, beadlock style wheels, Kumho tires, foam inserts) (2) (2WD front only)
5882	Tire & wheel assy, glued (SCT Split-Spoke satin chrome, black beadlock style wheels, Kumho tires, foam inserts) (2) (2WD front)
5882R	Tire & wheel assy, glued (S1 compound) (SCT Split-Spoke satin chrome, black beadlock style wheels, Kumho tires, foam inserts) (2) (2WD front)
5883	Tire & wheel assy, glued (SCT Split-Spoke, black, satin chrome beadlock wheels, BFGoodrich® Mud-Terrain T/A® KM2 tire, inserts) (2) (4WD f/r, 2WD rear)
5883-BLK	Tire & wheel assy, glued (SCT Split-Spoke black wheels, BFGoodrich® Mud-Terrain (4WD f/r, 2WD rear)
5883A	Tire & wheel assy, glued (SCT Split-Spoke, black, blue beadlock wheels, BFGoodrich® Mud-Terrain tire, inserts) (2) (4WD f/r, 2WD rear)
5884	Wheels, SCT Split-Spoke, black, satin chrome beadlock style, dual profile (2.2" outer 3.0" inner) (4WD f/r, 2WD rear)	2
5884A	Wheels, SCT Split-Spoke, black, blue beadlock style, dual profile (2.2" outer 3.0" inner) (4WD f/r, 2WD rear)	2
5885	Tire & wheel assy, glued (SCT Split-Spoke, black, satin chrome beadlock wheels, BFGoodrich® Mud-Terrain T/A® KM2 tires, inserts) (2) (2WD Front)
5885-BLK	Tire & wheel assy, glued (SCT Split-Spoke black wheels, BFGoodrich® Mud-Terrain (2) (2WD front)
5885A	Tire & wheel assy, glued (SCT Split-Spoke, black, blue beadlock wheels, BFGoodrich® Mud-Terrain tires, inserts) (2) (2WD Front)
5886	Wheels, SCT Split-Spoke, black, satin chrome beadlock style, dual profile (2.2" outer 3.0" inner) (2WD front)	2
5889	Tires & wheels, assembled, glued (SCT Split-Spoke, black, satin chrome beadlock style wheel, dual profile (2.2" outer, 3.0" inner), SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
5889R	Tire & wheel assembled, glued (S1 compound) (SCT Split- Spoke black, satin chrome beadlock style wheel (dual profile 2.2" outer 3.0" inner), SCT off-road tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
5891	Tires & wheels, assembled, glued (SCT Split-Spoke black, satin chrome beadlock style wheels, paddle tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
5892	Tires & wheels, assembled, glued (SCT Split-Spoke orange wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
5892G	Tires & wheels, assembled, glued (SCT Split-Spoke green wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
5893	LED light harness, rear (requires #5838, 6737X, or 6836 rear bumper)
5894	LED light set, complete (includes front and rear bumpers with LED light bar, rear LED harness, & BEC Y-harness) (fits 2WD Slash®)
5915	Body, Slash® VXL 2WD, ProGraphix® (also fits Slash® 4X4) (graphics are printed, requires paint & final color application)/ decal sheet
5924	Body, Slash® 2WD, ProGraphix® (also fits Slash® VXL & Slash® 4X4) (graphics are printed, requires paint & final color application)/ decal sheet
5924-GRN	Body, Slash® 2WD (also fits Slash® VXL & Slash® 4X4), green (painted, decals applied) (assembled with front & rear latches for clipless mounting)
5924-RED	Body, Slash® 2WD (also fits Slash® VXL & Slash® 4X4), red (painted, decals applied) (assembled with front & rear latches for clipless mounting)
6093	6093
6442	Spur gear, 46-tooth (machined, hardened steel) (wide face, 1.0 metric pitch)
6443	Spur gear, 50-tooth (machined, hardened steel) (wide face, 1.0 metric pitch)
6444	Spur gear, 54-tooth (machined, hardened steel) (wide face, 1.0 metric pitch)
6447R	Spur gear, 46-tooth, steel (wide-face, 1.0 metric pitch)
6448R	Spur gear, 50-tooth, steel (wide-face, 1.0 metric pitch)
6449R	Spur gear, 54-tooth, steel (wide-face, 1.0 metric pitch)
6449X	Spur gear, 54-tooth, steel (1.0 metric pitch)
6484X	Gear, 11-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
6485X	Gear, 12-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
6486X	Gear, 13-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
6487X	Gear, 15-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
6488X	Gear, 14-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
6489X	Gear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
6490X	Gear, 17-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
6491R	Gear, 18-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
6494R	Gear, 20-T pinion (machined, hardened steel) (1.0 metric pitch) (fits 5mm shaft)/ set screw
6505-2CH	Transmitter, TQi Sport Compact 2.4GHz, 2-channel (transmitter only)
6506-2CH	Transmitter, TQi Sport, 2.4GHz high output, 2-channel (transmitter only)
6507A	TQi 2.4 GHz High Output radio system, 4-channel with Traxxas® Link Bluetooth® module, TSM® (4-ch transmitter, 5-ch micro receiver)
6507R	TQi 2.4 GHz High Output radio system, 4-channel with Traxxas® Link Bluetooth® module, TSM® (4-ch transmitter, 5-ch micro receiver)
6509A	TQi 2.4 GHz High Output radio system, 2-channel, Traxxas® Link enabled, TSM® (2-ch transmitter, 5-ch micro receiver)
6509R	TQi 2.4 GHz High Output radio system, 2-channel, Traxxas® Link enabled, TSM® (2-ch transmitter, 5-ch micro receiver)
6511	Traxxas® Link Bluetooth® module
6512	Cover plate, Traxxas® Link Bluetooth® module
6520	Sensor, RPM (long)/ 3x4mm BCS (1)/ 3x4 GS	1
6521	Sensor, temperature and voltage (long)
6525	Communication link, telemetry expander
6526	Sensor, auto-detectable, temperature
6527	Sensor, auto-detectable, voltage
6528X	Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 2-channel (transmitter only)
6529X	Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 3-channel (transmitter only)
6530	Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 4- channel (transmitter only)
6530X	Transmitter, TQi Traxxas® Link enabled, 2.4GHz high output, 4-channel (transmitter only)
6531	Sensor, temperature & voltage (fits X-Maxx®, XRT® or Pro Scale® Sand Car)
6533	Receiver, micro, TQi 2.4GHz with telemetry & TSM® (5-channel)
6533X	Receiver, micro, TQi 2.4GHz with telemetry & TSM® (5- channel)
6535	Mount, temperature sensor (electric motors)/ wire tie/ thermal pad
6537	Wire retainers, gear cover/ 3x4mm BCS (2) Slash® Brushless EHD: 1/10-Scale 2WD Short Course Racing Truck with TQi Stability Management (TSM)
6538	Telemetry trigger magnet holders, spur gear/ magnet, 5x2mm (1)/ 3x8mm CCS (3)/ 3x10mm CCS	3
6540	Telemetry trigger magnet, 5X2mm	1
6541X	Connector, power tap (with cable)/ 2.6x8 BCS (2) (use #6549 power tap for telemetry voltage)
6548	Battery door, TQ 2.4 transmitter (replacement for #6516, 6517 transmitter)
6550X	Telemetry expander 2.0, TQi radio system (for use only with #6551X GPS module)
6551X	Telemetry GPS module 2.0, TQi radio system (for use only with #6550X telemetry expander)
6552	Seal kit, expander box (includes o-ring, seals, and silicone grease)
6553X	Telemetry Expander 2.0 and GPS module 2.0, TQi radio system
6561	Mount, telemetry expander
6562	Mount, telemetry expander (requires #6730 chassis brace kit)
6565	Data link, telemetry expander (connects #6550X telemetry expander 2.0 to the #6590 high-voltage power amplifier)
6566	Data link, telemetry expander (connects #6550X telemetry expander 2.0 to the Velineon® #3465 VXL-4s, #3485 Velineon® VXL-6s, or #3496 Velineon® VXL-8s electronic speed control)
6568-3CH	Receiver, micro, TQi Sport, 2.4GHz with TSM® (3-channel)
6576	TQi Sport 2.4 GHz High Output radio system, 2-channel, TSM® (2-channel transmitter, 3-channel micro receiver)
6588X	Accessory power supply (regulated, 3V, 3 amp)/ power tap connector (with cable)/ 3x10 BCS (2)/ 2.6x8 BCS	2
6589	Distribution block, LED light set
6590	High-Voltage Power Amplifier
6591	Pro Scale® Advanced Lighting Control System (includes power module & distribution block)
6592	Power module, Pro Scale® Advanced Lighting Control System (includes mount, communication cables, hardware)
6593	Distribution block, Pro Scale® Advanced Lighting Control System
6594	Receiver communication cable, Pro Scale® Advanced Lighting Control System
6644	6644
6719	Body support/ 3x12mm CS	4
6720	Body mounts, front & rear/ 3x12mm CS (4)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (8)/ 3x12mm BCS	1
6721-BLK	Wing, Rustler® (black)
6721-BLUE	Wing, Rustler® (blue)
6721-GRN	Wing, Rustler® (green)
6721-ORNG	Wing, Rustler® (orange)
6721-RED	Wing, Rustler® (red)
6723-DGRY	Chassis w/ bearing support for center driveshaft, charcoal gray (162mm long battery compartment) (fits flat style battery packs) (use only with #7430R front bulkhead & #6726X battery hold-down) (requires #6724-BLK receiver box)
6723-GRAY	Chassis w/ bearing support for center driveshaft, gray (162mm long battery compartment) (fits flat style battery packs) (use only with #7430R front bulkhead & #6726X battery hold-down) (requires #6724-BLK receiver box) (162mm long battery compartment) (fits flat style battery packs) (use only with #7430R front bulkhead & #6726X battery hold- down) (requires #6724-BLK receiver box)
6724	Box, receiver (sealed)/ foam pad/ 2.5x8mm CS (4)/ 3x10mm CS	2
6724-BLK	Box, receiver (sealed)/ foam pad/ 2.5x8mm CS (5)/ 3x10mm CS	2
6726X	Battery hold-down (3)/ battery clip/ hold-down post/ screw pin/ pivot post screw (fits #6723R chassis with 162mm long battery compartment)
6728	Skid plate, roof (body)/ 3x12mm CS	4
6728G	Skid plate, roof (body) (green)/ 3x12 CS	4
6728R	Skid plate, roof (body) (red)/ 3x12mm CS	4
6728T	Skid plate, roof (body) (orange)/ 3x12 CS	4
6728X	Skid plate, roof (body) (blue)/ 3x12mm CS	4
6730A	Chassis brace kit, orange (fits Rustler® 4X4 or Slash® 4X4 models equipped with Low-CG chassis)
6730G	Chassis brace kit, green (fits Rustler® 4X4 or Slash® 4X4 models equipped with Low-CG chassis)
6730R	Chassis brace kit, red (fits Rustler® 4X4 or Slash® 4X4 models equipped with Low-CG chassis)
6730X	Chassis brace kit, blue (fits Rustler® 4X4 or Slash® 4X4 models equipped with Low-CG chassis)
6736	Bumper, front/ bumper support
6736-BLK	Bumper, front/ bumper support
6736X	Bumper, front / bumper support (fits 4WD Rustler®) (for LED light kit installation)
6737	Bumper, rear/ bumper mount, rear
6737X	Bumper, rear / bumper mount (fits 4WD Rustler®) (for LED light kit installation)
6742	Toe link, front & rear (molded composite) (2)/ hollow balls (4) (87mm center to center)
6742G	Toe links (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench	1
6742R	Toe links (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench (1) If you have questions or need technical assistance, call Traxxas at: For orders, calls outside the U.S., and other information, call 972-549-3000,
6742X	Toe links (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4) aluminum wrench	1
6745	Gear, 9-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw
6746	Gear, 10-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw
6747	Gear, 11-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw
6750	Half shaft, external splined (steel-spline constant velocity)	1
6751	Half shaft, internal splined (steel-spline constant velocity)	1
6753	Stub axle, rear, steel-splined constant velocity	1
6757	Rebuild kit, steel-splined constant-velocity driveshafts (includes pins, dustboots, lube, and hardware)
6762-BLUE	Body, Stampede® 4X4 Brushless, blue (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)
6762X	Body, Stampede® 4X4 Brushless, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheet
6764	Tires & wheels, assembled, glued (2.8") (RXT black wheels, Gravix® tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)
6765	Driveshaft, center, 6061-T6 aluminum (blue-anodized) (189mm)
6765A	Driveshaft, center, 6061-T6 aluminum (orange-anodized) (189mm)
6765G	Driveshaft, center, 6061-T6 aluminum (green-anodized) (189mm)
6765R	Driveshaft, center, 6061-T6 aluminum (red-anodized) (189mm)
6767X	Driveshaft, center, plastic (black)/ screw pin
6769	Tires, Talon EXT 2.8" (2)/ foam inserts	2
6771	Tires & wheels, assembled, glued 2.8" (All-Star chrome wheels, Maxx® tires, foam inserts)	2
6772	Wheels, RXT 2.8" (black)	2
6773	Tires & wheels, assembled, glued (2.8") (RXT black wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)
6773A	Tires & wheels, assembled, glued (2.8") (RXT orange wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)
6773G	Tires & wheels, assembled, glued (2.8") (RXT green wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)
6773R	Tires & wheels, assembled, glued (2.8") (RXT satin chrome wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)
6773X	Tires & wheels, assembled, glued (2.8") (RXT black chrome wheels, Talon EXT tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)
6775	Tires & wheels, assembled, glued (2.8") (RXT black wheels, Anaconda tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)
6775A	Tires & wheels, assembled, glued (2.8") (RXT orange wheels, Anaconda tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)
6775G	Tires & wheels, assembled, glued (2.8") (RXT green wheels, Anaconda tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)
6775X	Tires & wheels, assembled, glued (2.8") (RXT black & chrome wheels, Anaconda tires, foam inserts) (4WD electric front/rear, 2WD electric front only) (2) (TSM rated)
6776	Wheelie bar
6780	Differential kit, center (complete) (aluminum carrier)
6780A	Differential kit, center (complete) (assembled with 500K wt differential fluid & 54T spur gear)
6781	Housing, center differential (aluminum)/ x-ring gaskets (2)/ ring gear gasket (1)/ bushings (4)/ 5x10x0.5 PTW (1)/ 2.5x10 CCS (with threadlock)	4
6783	Gear set, differential (spider gears (4)/ spider gear shaft (2))
6788	Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®) (13/37 ratio)
6789	Differential, rear (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®) (13/37 ratio)
6790X	Gear adapters, fixed (fits Rustler® 4X4 or Slash® 4X4 models equipped with Low-CG chassis)
6791	Bumper, front (assembled, LED lights installed) (fits 4WD Rustler®)
6792	Tires & wheels, assembled, glued (black 2.8" wheels, Sledgehammer® tires, foam inserts) (2) (TSM® rated)
6793	LED light set, complete (includes front and rear bumpers with LED light bar, rear LED harness, & BEC Y-harness) (fits 4WD Rustler®)
6795	LED light set, complete (includes bumper with LED lights, roof skid plate with LED lights, 3-volt accessory power supply, and power tap connector (with cable) (fits #6717 body)
6796	Skid plate, roof (body) (with LED lights) (fits #6717 body)
6797	Bumper, front (with LED lights) (replacement for #6736 front bumper)
6812-GRN	Body, Slash® VXL 2WD (also fits Slash® 4X4), green & blue (painted, decals applied) (assembled with front & rear latches for clipless mounting)
6812-RED	Body, Slash® VXL 2WD (also fits Slash® 4X4), red (painted, decals applied) (assembled with front & rear latches for clipless mounting)
6813R	Decal sheet, Slash® 4X4
6814	Differential kit, center (complete)
6823	Bulkhead tie bars, front & rear, aluminum (blue-anodized)
6823-GRAY	Bulkhead tie bars, front & rear, aluminum (gray-anodized)
6823-ORNG	Bulkhead tie bars, front & rear, aluminum (orange-anodized)
6823G	Bulkhead tie bars, front & rear, aluminum (green-anodized)
6823R	Bulkhead tie bars, front & rear, aluminum (red-anodized)
6828A	Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft)/ screw pin	2
6829	Bulkhead, rear
6830X	Bulkhead, front
6834	Suspension pin set, complete (front and rear)
6835X	Bumper, front / bumper support (fits Slash® 4X4) (for LED light kit installation)
6836X	Bumper, rear / bumper mount (fits Slash® 4X4) (for LED light kit installation)
6842	Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch)
6842R	Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch) (for Slash 4x4 center differential)
6842X	Spur gear, steel, 50-tooth (0.8 metric pitch, compatible with 32- pitch) (for center differential)
6843	Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch)
6843R	Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch) (for Slash 4x4 center differential)
6844-GRN	Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD), green and blue (painted, decals applied) (assembled with front & rear latches for clipless mounting)
6844-ORNG	Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD), orange and blue (painted, decals applied) (assembled with front & rear latches for clipless mounting)
6845A	Drag link, machined 6061-T6 aluminum (blue-anodized)
6845G	Drag link, machined 6061-T6 aluminum (green-anodized)
6845R	Drag link, machined 6061-T6 aluminum (red-anodized)
6845T	Drag link, machined 6061-T6 aluminum (orange-anodized)
6845X	Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn, steering
6846	Linkage, steering (Revo) (3x20mm turnbuckle) (1)/ rod ends (2)/ hollow balls	2
6849-FOX	Body, Slash® VXL 2WD (also fits Slash® 4X4), Fox® Edition (painted, decals applied) (assembled with front & rear latches for clipless mounting)
6852A	Driveshaft assembly, rear, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin	1
6853A	Stub axle assembly, rear, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft)
6857	Springs, front (white) (progressive rate)	2
6858	Springs, rear (white) (progressive rate)	2
6860A	Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL	1
6860R	Motor mount, 6061-T6 aluminum (blue-anodized)
6861	Springs, front (progressive, -20% rate, orange)	2
6862	Springs, front (progressive, -10% rate, green)	2
6863	Springs, front (progressive, +10% rate, pink)	2
6864	Springs, front (progressive, +20% rate, blue)	2
6865	Springs, rear (progressive, -20% rate, orange)	2
6866	Springs, rear (progressive, -10% rate, green)	2
6867	Springs, rear (progressive, +10% rate, pink)	2
6868	Springs, rear (progressive, +20% rate, blue)	2
6870	Tires, Kumho (dual profile 4.3x1.7- 2.2/3.0") (2)/ foam inserts	2
6870R	Tires, Kumho, ultra-soft (S1 off-road racing compound) (dual profile 4.3x1.7- 2.2/3.0") (2)/ foam inserts	2
6871	Tires, BFGoodrich® Mud-Terrain ™ T/A® KM2 (dual profile 4.3x1.7- 2.2/3.0") (2)/ foam inserts	2
6871R	Tires, BFGoodrich® Mud-Terrain ™ T/A® KM2 , ultra-soft (S1 off-road racing compound) (dual profile 4.3x1.7- 2.2/3.0") (2)/ foam inserts	2
6872	Wheels, SCT Split-Spoke, satin chrome, black beadlock style, dual profile (2.2" outer 3.0" inner) (4WD front/rear, 2WD rear only)	2
6872X	Wheels, SCT Split-Spoke, chrome, green beadlock style, dual profile (2.2" outer 3.0" inner) (4WD front/rear, 2WD rear)	2
6873	Tires & wheels, assembled, glued (SCT Split-Spoke satin chrome, black beadlock style wheels, BFGoodrich® Mud- Terrain rear) (TSM® rated)
6873A	Tire & wheel assy, glued (SCT Split-Spoke chrome, red beadlock style wheel, BFGoodrich® Mud-Terrain KM2 tire, inserts) (2) (4WD f/r, 2WD rear)
6873R	Tire & wheel assy, glued (S1 compound) (SCT SS, chrome red beadlock wheel, BFGoodrich® Mud-Terrain KM2 tire, inserts) (2) (4WD f/r, 2WD rear)
6873X	Tire & wheel assy, glued (S1 compound) (SCT SS, satin chrome black beadlock wheel, BFGoodrich® Mud- Terrain
6874	Tire & wheel assy, glued (SCT Split-Spoke satin chrome, black beadlock style wheels, Kumho tires, foam inserts) (2) (4WD front/rear, 2WD rear only)
6874-BLK	Tire & wheel assy, glued (SCT Split-Spoke black wheels, Kumho tires, foam inserts) (2) (4WD front/rear, 2WD rear only)
6874R	Tire & wheel assy, glued (S1 compound) (SCT Split-Spoke satin chrome, black beadlock wheel, Kumho tire, insert) (2) (4WD front/rear, 2WD rear only)
6876	Tire & wheel assy, glued (SCT, chrome, green beadlock wheel, BFGoodrich® Mud-Terrain inserts) (2) (4WD front/rear, 2WD rear only)
6877	Cover, gear/ motor wire hold-down clip
6877A	Cover, gear (clear)
6879	Ring gear, differential/ pinion gear, differential (rear)
6879R	Ring gear, differential/ pinion gear, differential (machined, spiral cut) (rear)
6880	Housings, differential, rear
6881	Housings, differential, front
6882X	Gear set, differential (output gears (2)/ spider gears (2)/ spider gear shaft, carrier support)
6884	Housing, center differential/ x-ring gaskets (2)/ ring gear gasket/ bushings (2)/ 5x10x0.5 TW (2)/ CCS 2.5x8	4
6888	Drive hub, center, rear (1)/ 4x3 GS	1
6888X	Drive hub, front, hardened steel (1)/ screw pin	1
6890	Plate, motor
6890-GRAY	Plate, motor, 6061-T6 aluminum (gray-anodized)
6890-ORNG	Plate, motor, 6061-T6 aluminum (orange-anodized)
6890R	Plate, motor, 6061-T6 aluminum (red-anodized)
6890X	Plate, motor, 6061-T6 aluminum (blue-anodized)
6892	Tires & wheels, assembled, glued (SCT Split-Spoke satin chrome, black beadlock style wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
6892R	Tires & wheels, assembled, glued (S1 compound) (SCT Split- Spoke satin chrome, black beadlock style wheels, SCT off- road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM® rated)
6894	LED light set, complete (includes front and rear bumpers with LED light bar, rear LED harness, & BEC Y-harness) (fits Slash® 4X4)
6910-BLUE	Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD), blue (painted, decals applied) (assembled with front & rear latches for clipless mounting)
6910-GRN	Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD), green (painted, decals applied) (assembled with front & rear latches for clipless mounting)
6910-ORNG	Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD), orange (painted, decals applied) (assembled with front & rear latches for clipless mounting)
6910-RED	Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD), red (painted, decals applied) (assembled with front & rear latches for clipless mounting)
6928	Chassis & body conversion kit, Slash 4X4 (includes front & rear body mounts, latches, hardware) (for clipless mounting)
6932-GRN	Body, Slash® 4X4, green (painted, decals applied) (assembled with front & rear body mount latches for clipless mounting)
6932-RED	Body, Slash® 4X4, red (painted, decals applied) (assembled with front & rear body mount latches for clipless mounting)
6932L	Body, Slash® 4X4, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheet
6933	Body, Slash® 4X4, ProGraphix® (also fits Slash® VXL & Slash® 2WD) (graphics are printed, requires paint & final color application)/ decal sheet
6934	Body conversion kit, Slash 2WD/Slash 4X4 (includes front & rear latch mounts, latches, hardware) (for clipless mounting)
6940	Body mounts (front & rear) (for clipless body mounting)
6941-BLUE	Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD), blue (painted, decals applied) (assembled with front & rear latches for clipless mounting)
6941-GRN	Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD), green (painted, decals applied) (assembled with front & rear latches for clipless mounting)
6941-ORNG	Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD), orange (painted, decals applied) (assembled with front & rear latches for clipless mounting)
6941-RED	Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD), red (painted, decals applied) (assembled with front & rear latches for clipless mounting)
6946-BLUE	Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD), blue (painted, decals applied) (assembled with front & rear latches for clipless mounting)
6946-GRN	Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD), green (painted, decals applied) (assembled with front & rear latches for clipless mounting)
6946-ORNG	Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD), orange (painted, decals applied) (assembled with front & rear latches for clipless mounting)
6946-RED	Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD), red (painted, decals applied) (assembled with front & rear latches for clipless mounting)
6951	Bumper, front/ bumper mount, front (black)
6952	Latch mounts/ retainers (front & rear, left & right) (fits #6958 body)
6953	Latch, body mount, front & rear (for clipless body mounting) (attaches to #6958 body)
6958	Body, Slash® 2WD (also fits Slash® VXL & Slash® 4X4) (clear, requires painting)/ window masks/ decal sheet (includes #6953 latches and #6952 latch mounts for clipless mounting)
6958R	Body, Slash® 4X4, heavy duty (also fits Slash® VXL & Slash® 2WD) (clear, requires painting)/ window masks/ decal sheets (requires #6953 latches and #6952 latch mounts for clipless mounting)
6958X	Body, Slash® 2WD (also fits Slash® VXL & Slash® 4X4), ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheet (includes #6953 latches and #6952 latch mounts for clipless mounting)
6964	Tires & wheels, assembled, glued (SCT Split-Spoke gray beadlock style wheels, SCT off-road racing tires, foam inserts) (2) (4WD f/r, 2WD rear) (TSM rated)
6965	Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD) (clear, requires painting)/ window masks/ decal sheet (requires #6967 latches and #6966 latch mounts for clipless mounting)
6965R	Body, Slash® 4X4, heavy duty (also fits Slash® VXL & Slash® 2WD) (clear, requires painting)/ window masks/ decal sheet (requires #6967 latches and #6966 latch mounts for clipless mounting)
6966	Latch mounts/ retainers (front & rear, left & right)
6967	Latch, body mounts (front & rear)
6981	Decal sheets, Slash®
6990	Body reinforcement set (fits #6958 body)
6992	Skid pads, roof (left & right)/ retainers (left & right)/ 3x10mm CS (6) (fits #6958 body)
6993	Skid pads, tailgate (left & right)/ retainers (left (2), right (2))/ 3x10mm CS (6) (fits #6958 body)
6994	Side skirts (left & right)/ retainers (left & right)/ 3x8mm BCS (6) (fits #6958 body)
7423	Nerf bars, chassis	2
7424	Box, receiver (sealed)/ foam pads/ 2.5x12mm CS (2)/ 3x6mm CS (2)/ 3x12mm BCS	2
7425	Seal kit, receiver box (includes o-ring, seals, and silicone grease)
7426	Battery hold-down (1)/ hold-down retainer, front & rear (1 each) (1 each)
7426X	Battery hold-down, tall (1)/ hold-down retainer, front & rear (1 each) (allows for installation of taller, multi-cell batteries) Body mount, rear/ inserts (2) (for clipless body mounting)
7428	Bumper, front/ bumper support (fits Slash® 4X4)
7429	Bulkhead, rear
7430R	Bulkhead, front (for use only with #6723R chassis)
7430X	Bulkhead, front
7438	Linkage, steering
7440	Spring, shock, white (GTR long) (0.623 rate orange) (1 pair)
7441	Spring, shock, white (GTR long) (0.653 rate green) (1 pair)
7442	Spring, shock, white (GTR xx-long) (0.711 rate orange) (1 pair)
7443	Spring, shock, white (GTR xx-long) (0.762 rate green) (1 pair)
7444	Spring, shock, white (GTR long) (0.767 rate black) (1 pair)
7445	Spring, shock, white (GTR long) (0.810 rate pink) (1 pair)
7446	Spring, shock, white (GTR xx-long) (0.874 rate black) (1 pair)
7447	Spring, shock, white (GTR xx-long) (0.884 rate pink) (1 pair)
7448	Spring, shock, white (GTR long) (0.892 rate blue) (1 pair)
7449	Spring, shock, white (GTR xx-long) (1.004 rate blue) (1 pair)
7452	Toe links (molded composite) (86.8mm center to center) (2) (assembled with hollow balls)
7453	Camber links, front (molded composite) (79.6mm center to center) (2) (assembled with hollow balls)
7454	Camber links, rear (molded composite) (72.4mm center to center) (2) (assembled with hollow balls)
7455X	Driveshaft, center, plastic (black)/ screw pin
7460A	Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL	1
7460R	Motor mount, 6061-T6 aluminum (blue-anodized)
7461	Shocks, GTR long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs)	2
7461-ORNG	Shocks, GTR long orange-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs)	2
7461-PINK	Shocks, GTR long pink-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs)	2
7461-RED	Shocks, GTR long red-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs)	2
7461G	Shocks, GTR long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs)	2
7461X	Shocks, GTR long, hard-anodized, PTFE-coated bodies with TiN shafts (assembled) (2) (without springs)
7462	Shocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs)	2
7462-GRAY	Shocks, GTR xx-long (gray) (assembled) (2) (without springs)
7462-ORNG	Shocks, GTR xx-long orange-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs)	2
7462-PINK	Shocks, GTR xx-long pink-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs)	2
7462-RED	Shocks, GTR xx-long red-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs)	2
7462G	Shocks, GTR xx-long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs)	2
7462X	Shocks, GTR xx-long, hard-anodized, PTFE-coated bodies with TiN shafts (assembled) (2) (without springs)
7463	Rebuild kit, GTR long/xx-long shocks (x-rings, bladders, pistons, piston nuts, shock rod ends, hollow balls) (renews 2 shocks)
7464	Shaft, GTR long (steel, chrome finish)	2
7464T	Shaft, GTR long, TiN-coated	2
7465	Shaft, GTR xx-long (steel, chrome finish)	2
7465T	Shaft, GTR xx-long, TiN-coated (2)	2
7466	Body, GTR long shock, aluminum (blue-anodized) (PTFE- coated bodies)	1
7466-PINK	Body, GTR long (pink-anodized, PTFE-coated aluminum)	1
7466-XGRY	Body, GTR long (gray-anodized, PTFE-coated aluminum)	1
7466G	Body, GTR long shock, aluminum (green-anodized) (PTFE-coated bodies)	1
7467	Body, GTR xx-long shock, aluminum (blue-anodized) (PTFE-coated bodies)	1
7467-PINK	Body, GTR xx-long (pink-anodized, PTFE-coated aluminum)	1
7467-XGRY	Body, GTR xx-long (gray-anodized, PTFE-coated aluminum)	1
7467A	Body, GTR xx-long shock, aluminum (orange-anodized) (PTFE-coated bodies)	1
7467R	Body, GTR xx-long shock, aluminum (red-anodized) (PTFE-coated bodies)	1
7468	Caps and spring retainers, GTR long/xx-long shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2)) balls (2)/ bottom cap (2)/ upper & lower retainers (slate gray) (2 each))
7468X	Caps & spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))
7474	Springs, shock (white) (GTR short) (0.58 rate) (1 pair)
7475	Springs, shock (white) (GTR short) (0.70 rate) (1 pair)
7476	Springs, shock (white) (GTR short) (0.87 rate) (1 pair)
7477	Cover, gear/ wire retainer
7490	Plate, motor
7490A	Plate, motor, orange
7490G	Plate, motor, green
7490R	Plate, motor, red
7691	Body, Ford F-150 Truck (clear, requires painting)/ window masks/ decal sheet (for clipless mounting) (fits X-Monster Chassis)
7691-BLK	Body, Ford F-150 Truck, complete, black (painted, decals applied) (assembled with body support for clipless mounting) (fits X-Monster
7691R	Body, Ford F-150 Truck, heavy duty (clear, 2.0mm, requires painting)/ window masks/ decal sheet (for clipless mounting) (fits X-Monster
7694	Mount, whip light (universal) (requires #10992 series whip light) (replacement for 1 whip light, left or right) (requires #6588X accessory power supply) (replacement for 1 whip light, left or right) (requires #6588X accessory power supply) (replacement for 1 whip light, left or right) (requires #6588X accessory power supply) (replacement for 1 whip light, left or right) (requires #6588X accessory power supply) Wire harness, power supply
7697	Body, Chevrolet GMT400 CK Truck (clear, requires painting)/ window masks/ decal sheet (for clipless mounting) (fits X- Monster decals applied) (assembled with body support for clipless mounting) (fits X-Monster
7697-GRN	Body, Chevrolet GMT400 CK Truck, complete, green (painted, decals applied) (assembled with body support for clipless mounting) (fits X-Monster
7697R	Body, Chevrolet GMT400 CK Truck, heavy duty (clear, 2.0mm, requires painting)/ window masks/ decal sheet (for clipless mounting) (fits X-Monster
7710	Body reinforcement set (fits #7711 body)
7711	Body, X-Maxx® (clear, trimmed, requires painting)/ window masks/ decal sheet (assembled with front & rear body mounts, rear body support, roof skid plate, and tailgate protector) (assembled with front & rear body mounts, rear body support, roof skid plate, and tailgate protector)
7711T	Body, X-Maxx®, Rock n' Roll (painted, decals applied) (assembled with tailgate protector)
7711X	Body, X-Maxx®, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheet
7712	Tailgate protector/ 3x8mm flathead screw	4
7713X	Body support, rear/ 3x15mm CS (2) / 3x15mm flat-head machine (2) (fits X-Maxx®) (painted, decals applied) (assembled with body support for clipless mounting) (fits X-Monster
7714X	Chassis top brace
7715	Body mounts, front & rear/ 3x15mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (6)/ 3x15mm flat-head machine screw	2
7716	Mount, tie bar, front (1)/ rear	1
7717X	Spacer, battery compartment (2)/ foam blocks (4)/ foam pad	2
7718	Battery hold-down mounts, left (2)/ right (2)/ 3x18mm CS	4
7719	Battery hold-down (2)/ foam pad	2
7720X	Bulkhead, front (upper) right & right
7721	Bulkhead, front (lower)
7722	Chassis
7723	Nerf bars, chassis	2
7724X	Box, receiver (sealed)/ wire cover/ foam pads/ silicone grease/ 3x15 CS	4
7726	Bulkhead tie bar, upper (1)/ lower (2) (steel)
7727A	Bulkhead, rear (upper & lower)/ motor mount washers (steel) (4)/ 4x18mm BCS (4) (replacing #7727 & #7728 requires #5107A ball bearings (2))
7727R	Bulkhead, rear (upper) (fits X-Maxx® 8s or XRT®) right)
7729	Suspension arm, upper (left or right, front or rear)	2
7730	Suspension arm, lower (right, front or rear)	1
7731	Suspension arm, lower (left, front or rear)	1
7732	Caster blocks (c-hubs), left & right
7733X	Bumper mount, front/ bumper support
7734X	Bumper mount, rear/ bumper support
7735	Bumper, front
7736	Bumper, rear
7737X	Steering blocks, left & right (requires 20x32x7 ball bearings)
7738	Shock tower, rear (left & right halves)
7739	Shock tower, front (left & right halves) anodized) (fits X-Maxx®) gray-anodized) (fits X-Maxx®)
7740	Suspension pin set, front or rear corner (hardened steel), 4x85mm (1), 4x47mm (3), 4x33mm (2) (qty 4, #7740 required for complete set)
7741	Suspension pins, 4x85mm (hardened steel)	2
7742	Suspension pin set, shock mount (front or rear, hardened steel), 4x25mm (2), 4x38mm	2
7743	Suspension pin retainer	4
7743-GRN	Suspension pin retainer, 6061-T6 aluminum (green-anodized) (4)	4
7743-RED	Suspension pin retainer, 6061-T6 aluminum (red-anodized)	4
7744	Skidplate, front (1), rear (1)/ rubber impact cushion	2
7745	Skidplate, center
7746	Steering bellcranks/ bellcrank support/servo saver/ servo saver spring/ draglink/ 3x20mm shoulder screws	2
7746-GRN	Steering bellcranks (left & right)/ draglink (6061-T6 aluminum, green-anodized) (fits X-Maxx®) orange-anodized) (fits X-Maxx®)
7746-RED	Steering bellcranks (left & right)/ draglink (6061-T6 aluminum, red-anodized) (fits X-Maxx®)
7746X	Steering link, steel/ servo saver spring, heavy duty (use with #2085X metal gear servo)
7747	Servo horn, steering/ linkage, steering (46mm, assembled with pivot balls) anodized) (fits X-Maxx®) gray-anodized) (fits X-Maxx®)
7747-GRN	Servo horn, steering, 6061-T6 aluminum (green-anodized)
7747-RED	Servo horn, steering, 6061-T6 aluminum (red-anodized)
7748	Toe links, molded composite, 173mm (158mm center to center) (black)	2
7748-BLK	Toe links, X-Maxx® (TUBES black-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm	1
7748G	Toe links, X-Maxx® (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1) aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm	1
7748R	Toe links, X-Maxx® (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm	1
7748X	Toe links, X-Maxx® (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1) stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm	1
7749	Adapter, standard servo (adapts standard servo to fit in Maxx®, X-Maxx®, XRT® or Pro Scale® Sand Car)
7750X	Driveshaft, steel constant-velocity (heavy duty, shaft only, 160mm) (1) (replacing #7750 also requires #7751X, #7754X and #7768 or #7768R)
7751X	Rebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies (for use only with #7750X driveshaft)
7752X	Carriers, stub axle (left & right) (requires 20x32x7 ball bearings) right)
7754R	Drive cup, steel, extreme heavy duty (2)/ 3x8mm CS, heavy duty (2) (use only with #7750X or 7896 driveshaft) (machined, heat treated)
7755	Driveshaft assembly, center, aluminum
7756G	Wheel hubs, hex, aluminum (green-anodized)	4
7756R	Wheel hubs, hex, aluminum (red-anodized)	4
7756X	Wheel hubs, hex, aluminum (blue-anodized)	4
7757	Wheel hex clips	6
7758	Wheel nuts, splined, 17mm, serrated (blue-anodized)	4
7758A	Wheel nuts, splined, 17mm, serrated (black-anodized)	4
7758G	Wheel nuts, splined, 17mm, serrated (green-anodized)	4
7758R	Wheel nuts, splined, 17mm, serrated (red-anodized)	4
7758T	Wheel nuts, splined, 17mm, serrated (orange-anodized)	4
7759	Washers, motor mount, aluminum (blue-anodized) (4)/ 4x18mm BCS (4) BCS	4
7759-BLK	Washers, motor mount, steel (4)/ 4x18mm BCS (4) Radio System, Batteries & Chargers
7759G	Washers, motor mount, aluminum (green-anodized) (4)/ 4x18mm BCS (4) 4x18mm BCS	4
7759R	Washers, motor mount, aluminum (red-anodized) (4)/ 4x18mm BCS	4
7760	Motor mounts (front and rear)/ pins (2) rear)
7760-GRN	Motor mounts, 6061-T6 aluminum (green-anodized) (front & rear) rear)
7760-RED	Motor mounts, 6061-T6 aluminum (red-anodized) (front & rear)
7761	Shocks, GTX, aluminum, blue-anodized (fully assembled w/o springs)	2
7761A	Shocks, GTX, aluminum (black-anodized) (fully assembled w/o springs)	2
7761G	Shocks, GTX, aluminum, green-anodized (fully assembled w/o springs)	2
7761R	Shocks, GTX, aluminum, red-anodized (fully assembled w/o springs)	2
7761T	Shocks, GTX, aluminum, orange-anodized (fully assembled w/o springs)	2
7762X	Rebuild kit, GTX shocks (lower cartridge, assembled, pistons, piston nuts, bladders) (renews 2 shocks)
7763	Shock shafts, GTX, 110mm (assembled with rod ends & hollow balls) (steel, chrome finish)	2
7763T	Shaft, GTX shock TiN-coated (2) (assembled with rod ends and steel hollow balls)
7764	Shock caps, GTX shocks/ spring perch/ adjusters/ 2.5x14 CS (2) (for 2 shocks)
7764A	Shock caps, aluminum (blue-anodized), GTX shocks (4)/ spacers (8) spacers	8
7764G	Shock caps, aluminum (green-anodized), GTX shocks (4)/ spacers	8
7764R	Shock caps, aluminum (red-anodized), GTX shocks (4)/ spacers	8
7764X	Shock caps, aluminum (hard anodized, PTFE-coated), GTX shocks (4)/ spacers (8) spacers	8
7765	Body, GTX shock (aluminum, blue-anodized)	1
7765G	Body, GTX shock (aluminum, green-anodized)	1
7765R	Body, GTX shock (aluminum, red-anodized)	1
7765T	Body, GTX shock (aluminum, orange-anodized)	1
7765X	Body, GTX shock (aluminum, hard-anodized, PTFE-coated)	1
7766	Springs, shock (natural finish) (GTX) (1.055 rate)	2
7767	Spring retainer (adjuster), blue-anodized aluminum, GTX shocks (4) (assembled with o-ring) shocks (4) (assembled with o-ring)
7767G	Spring retainer (adjuster), green-anodized aluminum, GTX shocks (4) (assembled with o-ring) shocks (4) (assembled with o-ring)
7767R	Spring retainer (adjuster), red-anodized aluminum, GTX shocks (4) (assembled with o-ring)
7767X	Spring retainer (adjuster), PTFE-coated aluminum, GTX shocks (4) (assembled with o-ring)
7768	Stub axle, aluminum, (blue-anodized) (1) (for use only with #7750X or 7896 driveshaft)
7768A	Stub axle, aluminum (black-anodized) (1) (for use only with #7750X or 7896 driveshaft)
7768G	Stub axle, aluminum, (green-anodized) (1) (for use only with #7750X or 7896 driveshaft)
7768R	Stub axle, aluminum, (red-anodized) (1) (for use only with #7750X or 7896 driveshaft)
7768T	Stub axle, aluminum, (orange-anodized) (1) (for use only with #7750X or 7896 driveshaft)
7771	Wheels, X-Maxx®, black (left and right)
7772A	Tires & wheels, assembled, glued (X-Maxx® black chrome wheels, Maxx® AT tires, foam inserts) (left & right)	2
7772G	Tires & wheels, assembled, glued (X-Maxx® green wheels, Maxx® AT tires, foam inserts) (left & right)	2
7772R	Tires & wheels, assembled, glued (X-Maxx® satin chrome wheels, Maxx® AT tires, foam inserts) (left & right)	2
7772T	Tires & wheels, assembled, glued (X-Maxx® orange wheels, Maxx® AT tires, foam inserts) (left & right)	2
7772X	Tires & wheels, assembled, glued (X-Maxx® black wheels, Maxx® AT tires, foam inserts) (left & right)	2
7773	Tires & wheels, assembled, glued (X-Maxx® black wheels, paddle tires, foam inserts) (left & right)	2
7774A	Tires & wheels, assembled, glued (X-Maxx® black chrome wheels, Sledgehammer® tires, foam inserts) (left & right)	2
7774G	Tires & wheels, assembled, glued (X-Maxx® green wheels, Sledgehammer® tires, foam inserts) (left & right)	2
7774T	Tires & wheels, assembled, glued (X-Maxx® orange wheels, Sledgehammer® tires, foam inserts) (left & right)	2
7775	Wheels, wheelie bar (2)/ axles, wheelie bar (2)/ 10x15x4 plastic bushings (4) (for #7776, 8976, or 9576 wheelie bar)
7775A	Wheels, wheelie bar, 6061-T6 aluminum (dark titanium- anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings	4
7775G	Wheels, wheelie bar, 6061-T6 aluminum (green-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings	4
7775R	Wheels, wheelie bar, 6061-T6 aluminum (red-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings	4
7775T	Wheels, wheelie bar, 6061-T6 aluminum (orange-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings	4
7775X	Wheels, wheelie bar, 6061-T6 aluminum (blue-anodized) (2)/ axle, wheelie bar, 6061-T6 aluminum (2)/ 10x15x4 ball bearings	4
7776	Wheelie bar, black (assembled)
7780	Housing, differential (front/rear) anodized)
7780-GRN	Housing, differential (front/rear), 6061-T6 aluminum (green- anodized) anodized)
7780-RED	Housing, differential (front/rear), 6061-T6 aluminum (red- anodized)
7781	Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 16X23.5X.5 TW
7781X	Carrier, differential (aluminum)/ (requires #7783X spider gear shaft)
7782	Gear set, differential (output gears (2)/ spider gears (4)/16X23.5X.5 TW(2))
7783	Spider gear shaft (2)/ spacers (4)/16X23.5X.5 TW	2
7783X	Spider gear shaft (2)/ spacers (4)/16x23.5x.5 stainless washer (2) (for #7781X aluminum differential carrier)
7784X	Output gear, 51-tooth, metal (requires #7785X input gear)
7785X	Input gear, transmission, 20-tooth/ 2.5x12mm pin
7786X	Input shaft, transmission (cush drive)
7787-GRN	Cover, gear (green-anodized 6061-T6 aluminum)
7787-RED	Cover, gear (red-anodized 6061-T6 aluminum)
7790	Pinion gear, differential, 11-tooth (front) (heavy duty) (use with #7792 35-tooth differential ring gear)
7791	Pinion gear, differential, 11-tooth (rear) (heavy duty) (use with #7792 35-tooth differential ring gear)
7792	Ring gear, differential, 35-tooth (heavy duty) (use with #7790, #7791 11-tooth differential pinion gears)
7793X	Housing, cush drive (front & rear halves)
7794	Cush drive key/ pin/ elastomer damper Drive cup, steel, extreme durability (1)/ 3x8mm CS (use only with #7750X & 7896 driveshafts) (machined, heat treated)
7796	Center drive, torque biasing (assembled)/ 17x26x5 ball bearings (2) (requires #7727A bulkheads)
7797	Rod ends (4) (assembled with steel pivot balls) (replacement ends for #7748G, 7748R, 7748X, 8542A, 8542R, 8542T, 8542X)
7798	Insert, threaded steel (replacement inserts for #7748G, 7748R, 7748X, 8542A, 8542R, 8542T, 8542X) (includes (1) left and (1) right threaded insert)
7799	Tires, rubber (2) (fits Traxxas® #7775X wheelie bar wheels)
7811	Body, X-Maxx®, orange (painted, decals applied) (assembled with front & rear body mounts, rear body support, roof skid plate, and tailgate protector)
7811G	Body, X-Maxx®, green (painted, decals applied) (assembled with front & rear body mounts, rear body support, roof skid plate, and tailgate protector) with front & rear body mounts, rear body support, roof skid plate, and tailgate protector)
7811R	Body, X-Maxx®, red (painted, decals applied) (assembled with front & rear body mounts, rear body support, roof skid plate, and tailgate protector)
7811X	Body, X-Maxx®, Solar Flare (painted, decals applied) (assembled with front & rear body mounts, rear body support, roof skid plate, and tailgate protector)
7817	Skid plate, roof (body) (black)/ 3x15mm CS (4) (requires #7713X to mount)
7817G	Skid plate, roof (body) (green)/ 3x15mm CS (4) (requires #7713X to mount)
7817R	Skid plate, roof (body) (red)/ 3x15mm CS (4) (requires #7713X to mount)
7817T	Skid plate, roof (body) (orange)/ 3x15mm CS (4) (requires #7713X to mount)
7817X	Skid plate, roof (body) (blue)/ 3x15mm CS (4) (requires #7713X to mount)
7829	Suspension arms, black, upper (left or right, front or rear), heavy duty	2
7829G	Suspension arms, green, upper (left or right, front or rear), heavy duty	2
7829R	Suspension arms, red, upper (left or right, front or rear), heavy duty	2
7829T	Suspension arms, orange, upper (left or right, front or rear), heavy duty	2
7829X	Suspension arms, blue, upper (left or right, front or rear), heavy duty (2) heavy duty	2
7830	Suspension arm, black, lower (right, front or rear), heavy duty	1
7830G	Suspension arm, green, lower (right, front or rear), heavy duty	1
7830R	Suspension arm, red, lower (right, front or rear), heavy duty	1
7830T	Suspension arm, orange, lower (right, front or rear), heavy duty	1
7830X	Suspension arm, blue, lower (right, front or rear), heavy duty (1) (1) duty	1
7831	Suspension arm, black, lower (left, front or rear), heavy duty	1
7831G	Suspension arm, green, lower (left, front or rear), heavy duty	1
7831R	Suspension arm, red, lower (left, front or rear), heavy duty	1
7831T	Suspension arm, orange, lower (left, front or rear), heavy duty	1
7831X	Suspension arm, blue, lower (left, front or rear), heavy duty	1
7832	Caster blocks (c-hubs), left & right
7832-GRN	Caster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left & right left & right
7832-RED	Caster blocks (c-hubs), 6061-T6 aluminum (red-anodized), left & right
7836	Steering blocks, left & right
7836-GRN	Steering blocks, 6061-T6 aluminum (green-anodized), left & right right
7836-RED	Steering blocks, 6061-T6 aluminum (red-anodized), left & right
7836X	Steering blocks, left & right/ caster blocks (c-hubs), left & right/ 20x32x7mm bearings (2)/ 15x24x5mm bearings	2
7852	Carriers, stub axle (rear) (left & right)
7852-GRN	Carriers, stub axle (green-anodized 6061-T6 aluminum) (left & right)
7852-RED	Carriers, stub axle (red-anodized 6061-T6 aluminum) (left & right)
7852X	Carriers, stub axle (rear) (left & right)/ 20x32x7mm bearings (2)/ 15x24x5mm bearings	2
7853	Springs, shock (natural finish) (GTX) (0.824 rate, white stripe)	2
7854	Springs, shock (natural finish) (GTX) (0.929 rate, orange stripe)	2
7855	Springs, shock (natural finish) (GTX) (1.199 rate, green stripe)	2
7856	Springs, shock (natural finish) (GTX) (1.346 rate, blue stripe)	2
7857	Springs, shock (natural finish) (GTX) (1.450 rate, black stripe)	2
7858	Springs, shock (natural finish) (GTX) (1.538 rate, red stripe)	2
7862	Tires & wheels, assembled, glued (XRT® Race black wheels, Gravix® belted tires, dual profile (4.3" outer, 5.7" inner), foam inserts) (left & right)
7862X	Tires & wheels, assembled, glued (XRT® Race black chrome wheels, Gravix® belted tires, dual profile (4.3" outer, 5.7" inner) foam inserts) (left & right)
7867-GRN	Body, X-Maxx®, green (painted, decals applied) (assembled with front & rear body mounts, rear body support, roof skid plate, and tailgate protector)
7867-RED	Body, X-Maxx®, red (painted, decals applied) (assembled with front & rear body mounts, rear body support, roof skid plate, and tailgate protector)
7868	Bellcrank bushing, steering (1) (for use with #7746 aluminum steering bellcranks)
7868-GRN	Body, X-Maxx® Ultimate, green (painted, decals applied) (assembled with front & rear body mounts, rear body support, roof skid plate, and tailgate protector)
7868X	Body, X-Maxx® Ultimate, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheet front & rear body mounts, rear body support, roof skid plate, and tailgate protector)
7870	Tires, Sledgehammer® (belted, dual profile (4.3" outer, 5.7" inner)) (left & right)/ foam inserts	2
7871	Tires & wheels, assembled, glued (X-Maxx® black wheels, Sledgehammer® belted tires, dual profile (4.3" outer, 5.7" inner), foam inserts) (left & right)
7871X	Tires & wheels, assembled, glued (X-Maxx® black chrome wheels, Sledgehammer® belted tires, dual profile (4.3" outer, 5.7" inner), foam inserts) (left & right)
7872	Tires & wheels, assembled, glued (XRT® Race black wheels, Gravix® tires, foam inserts) (left & right)
7873	Tires, Gravix® (left & right)/ foam inserts	2
7874	Wheels, XRT® Race, black (left and right)
7875	Tires & wheels, assembled, glued (XRT® Race black wheels, Maxx® AT tires, foam inserts) (left & right)
7876	Tires & wheels, assembled, glued (XRT® Race black wheels, Sledgehammer® tires, foam inserts) (left & right)
7877	Tires & wheels, assembled, glued (X-Maxx® black wheels, Gravix® tires, foam inserts) (left & right)
7878X	Spacer, motor shaft (steel)/ e-clip	1
7879-GRN	Drag link, 6061-T6 aluminum (green-anodized)
7879-RED	Drag link, 6061-T6 aluminum (red-anodized)
7880	Differential, front, complete (fits X-Maxx® 8s or XRT®)
7881	Differential, rear, complete (fits X-Maxx® 8s or XRT®) Drive cup, steel, extreme durability (1)/ 3x8mm CS (use only with #7750X & 7896 driveshafts) (machined, heat treated)
7882	Extension harness, LED lights (high-voltage)
7883X	LED light bar, rear, red (with white reverse light) (high-voltage) (24 red LEDs, 24 white LEDs, 100mm wide)/ light bar mount (fits Maxx®, X-Maxx®, or XRT®) accessory power supply, power harnesses & mounting hardware)
7884	LED light bar, front (high-voltage) (40 white LEDs (double row), 82mm wide) (fits Maxx®, Maxx Slash®, X-Maxx®, or XRT®)
7885	LED light kit, complete (includes #6590 high-voltage power amplifier) accessory power supply, power harnesses & mounting hardware) accessory power supply, power harnesses & mounting hardware)
7886	Gear set, overdrive (includes 47T ouput gear, 24T input gear, 3x10mm FCS (with threadlock) (4))
7887	Covers, gear	3
7888	Spacer, shock cap, 6061-T6 aluminum (black-anodized)	8
7889	Hardware kit, X-Maxx® (contains all hardware used on X- Maxx®)
7889X	Hardware kit, stainless steel, X-Maxx® (contains all stainless steel hardware used on X-Maxx®)
7890	Ball bearing kit, X-Maxx®/XRT® (complete)
7892	Suspension arms, upper, black (left or right, front or rear) (2) (for use with #7895 X-Maxx® WideMaxx® suspension kit)
7892G	Suspension arms, upper, green (left or right, front or rear) (2) (for use with #7895 X-Maxx® WideMaxx® suspension kit)
7892R	Suspension arms, upper, red (left or right, front or rear) (2) (for use with #7895 X-Maxx® WideMaxx® suspension kit)
7892T	Suspension arms, upper, orange (left or right, front or rear) (2) (for use with #7895 X-Maxx® WideMaxx® suspension kit)
7892X	Suspension arms, upper, blue (left or right, front or rear) (2) (for use with #7895 X-Maxx® WideMaxx® suspension kit)
7893	Suspension arm, lower, black (1) (right, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)
7893G	Suspension arm, lower, green (1) (right, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)
7893R	Suspension arm, lower, red (1) (right, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)
7893T	Suspension arm, lower, orange (1) (right, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)
7893X	Suspension arm, lower, blue (1) (right, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)
7894	Suspension arm, lower, black (1) (left, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)
7894G	Suspension arm, lower, green (1) (left, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)
7894R	Suspension arm, lower, red (1) (left, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)
7894T	Suspension arm, lower, orange (1) (left, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)
7894X	Suspension arm, lower, blue (1) (left, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)
7895	Suspension kit, X-Maxx® WideMaxx®, black (includes front & rear suspension arms, front toe links, driveshafts, shock springs)
7895G	Suspension kit, X-Maxx® WideMaxx®, green (includes front & rear suspension arms, front toe links, driveshafts, shock springs)
7895R	Suspension kit, X-Maxx® WideMaxx®, red (includes front & rear suspension arms, front toe links, driveshafts, shock springs)
7895T	Suspension kit, X-Maxx® WideMaxx®, orange (includes front & rear suspension arms, front toe links, driveshafts, shock springs)
7895X	Suspension kit, X-Maxx® WideMaxx®, blue (includes front & rear suspension arms, front toe links, driveshafts, shock springs)
7896	Driveshaft, steel constant velocity (shaft only, 190.3mm) (1) (for use with #7895 X-Maxx® WideMaxx® suspension kit)
7897	Toe links, 202.5mm (187.5mm center to center) (black) (2) (for use with #7895 X-Maxx® WideMaxx® suspension kit)
7897A	Toe links, front (TUBES black-anodized, 7075-T6 aluminum, stronger than titanium) (2) (for use with #7895 X-Maxx® WideMaxx® suspension kit)
7897G	Toe links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (2) (for use with #7895G X-Maxx® WideMaxx® suspension kit)
7897R	Toe links, front (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (2) (for use with #7895R X-Maxx® WideMaxx® suspension kit) 1-888-TRAXXAS or fax to 972-549-3011 e-mail Traxxas at support@Traxxas.com
7897X	Toe links, front (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (2) (for use with #7895X X-Maxx® WideMaxx® suspension kit)
7936-GRN	Body, X-Maxx® Ultimate, green (painted, decals applied) (assembled with front & rear body mounts, rear body support, roof skid plate, and tailgate protector)
7943	7943
7945	Driveshaft, steel constant-velocity (shaft only, 160mm) (laser- etched with Traxxas logo)	1
8017	Fender flares, front & rear (2 each) (fits #8011 or #8211 series bodies)
8018	Fenders, inner, front & rear (2 each)/ rock light covers	8
8019	Fender brace, inner, front & rear
8020	Mirrors, side (left & right)/ snorkel/ mounting hardware (fits #8011 series bodies)
8021	Spare tire mount/ mounting bracket/ screw pins	2
8022	Fuel canisters (red) (2)/ screw pin
8022-GRN	Fuel canisters (green) (2)/ screw pin
8022A	Fuel canisters (yellow) (2)/ screw pin
8022R	Fuel canisters (blue) (2)/ screw pin
8022T	Fuel canisters (black) (2)/ screw pin
8022X	Fuel canisters (white) (2)/ screw pin
8023	Jack (1)/ 2x8 BCS	1
8023T	Jack (black) (1)/ 2x8 BCS	1
8025	LED lightbar (Rigid), TRX-4® (requires #8028 power supply)
8026X	LED rock light kit, TRX-4®/TRX-6 ™ (requires #8028 power supply and #8018, #8072, or #8080 inner fenders)
8027	LED headlight/tail light kit (fits #8011 series bodies, requires #8028 power supply)
8028	LED lights, power supply (regulated, 3V, 0.5-amp)/ 3-in-1 wire harness
8029	LED lightbar kit (Rigid)/power supply, TRX-4®
8031	3-in-1 wire harness, LED light kit
8032R	Installation kit, Pro Scale® Advanced Lighting Control System, TRX-4® Ford Bronco (1979), Ford F-150 (1979), or Chevrolet K10 Truck (1979) (includes mount, reverse lights harness, hardware)
8035A	LED light set, complete with power supply (contains headlights, tail lights, side marker lights, & distribution block) (fits #8010 or 9230 series bodies)
8035R	Pro Scale® LED light set, TRX-4® Ford Bronco (1979) or Ford F- 150 (1979), complete with power module (contains headlights, tail lights, side marker lights, & distribution block) (fits #8010 or 9230 series bodies)
8036R	LED light set (contains headlights, tail lights, side marker lights, and distribution block) (fits #8010 or 9230 series bodies, requires #8028 power supply)
8037	LED lights, high/low switch (for #8035 or #8036 LED light kits)
8038	LED light set, complete with power supply (contains headlights, tail lights, side marker lights, & distribution block) (fits #8126 series bodies)
8038X	Pro Scale® LED light set, TRX-4® Chevrolet Blazer or K10 Truck (1979), complete with power module (contains headlights, tail lights, side marker lights, & distribution block) (fits #8126 or 9212 series bodies)
8039	LED light set (contains headlights, tail lights, side marker lights, & distribution block) (fits #8126 series bodies, requires #8028 power supply)
8040	Springs, shock (GTS) (rear) (0.54 rate)	2
8041	Springs, shock (GTS) (front) (0.45 rate)	2
8042	Springs, shock (natural finish) (GTS) (0.22 rate, yellow stripe)	2
8043	Springs, shock (natural finish) (GTS) (0.30 rate, white stripe)	2
8044	Springs, shock (natural finish) (GTS) (0.39 rate, orange stripe)	2
8045	Springs, shock (natural finish) (GTS) (0.61 rate, blue stripe)	2
8048	LED light harness, head lights (fits #8188, 9240 & 8010 series bodies)
8052	Spur gear, 39-tooth (32-pitch)
8053	Spur gear, 45-tooth (32-pitch)
8057	Chassis conversion kit, TRX-4® (short to long wheelbase) (includes rear upper & lower suspension links, front & rear shock towers, long female half shaft)
8058	Chassis conversion kit, TRX-4® (long to short wheelbase) (includes rear upper & lower suspension links, front & rear inner fenders, short female half shaft, battery tray, 3x8mm FCS (4))
8060	Axle shaft, front, heavy duty (left & right) (requires #8064 front portal drive input gear)
8061	Axle shaft, rear, heavy duty (left & right)/ portal drive input gear, rear (machined) (2) (assembled)
8062	Axle shaft, front, heavy duty (left & right)/ portal drive input gear, front (machined) (2) (assembled)
8063	Axle shaft, rear, heavy duty (left & right) (requires #8065 rear portal drive input gear)
8064	Portal drive input gear, front (machined) (left or right) (requires #8060 front axle shaft)
8065	Portal drive input gear, rear (machined) (left or right) (requires #8063 rear axle)
8066	Push bar, bumper (chrome) (fits #8069 bumper)
8067	Bumper mounts, front & rear
8067X	Bumper mounts, front & rear/ bumper mount, rear (offset)
8068	Bumper, rear (chrome)/ bumper mount/ 3x10 BCS	2
8070	Grille, Ford Bronco or F-150/ grille retainers (6)/ headlight housing (2)/ lens (2)/ 2.6x8 BCS (6)/ 2.5x6 BCS (2) (fits #8010 or 9230 series bodies)
8071	Tailgate panel/ tail light lens (2) (left & right) (fits #8010 series bodies)
8072	Fenders, inner, front & rear (2 each)/ rock light covers (8)/ battery plate/ 3x8 flathead screws	4
8072X	Fenders, inner (wide), front & rear (2 each)/ rock light covers (8)/ battery plate/ 3x8 flat-head screws (4) (for clipless body mounting)
8073	Mirrors, side, black (left & right)/ retainers (2)/ body clips (4) (fits #8010 or 9230 series bodies)
8073X	Mirrors, side, chrome (left & right)/ retainers (2)/ body clips (4) (fits #8010 or 9230 series bodies)
8074	Spare tire mount/ mounting bracket/ spare tire cover/ mounting hardware
8075	Door handles, left & right/ windshield wipers, left & right/ retainers (3)/ 1.6x5 BCS (self-tapping) (4) (fits #8010 or 9230 series bodies)
8076	Side trim, left & right (chrome)/ retainers/ LED lens/ 2.6x8 BCS (24) (fits #8010 series bodies)
8077	Tailgate panel insert (clear, requires painting)/ adhesive foam tape (2) (fits #8010 series bodies)
8078	Decal sheet, Bronco, sunset (fits #8010 body)
8078R	Decal sheet, Bronco, red (fits #8010 body)
8080	Fenders, inner (narrow), front & rear (2 each)/ rock light covers (8)/ battery plate/ body mount/ 3x8 flat-head screws (4)/ 2.5x6 CS	10
8080X	Fenders, inner (narrow), front & rear (2 each)/ rock light covers (8)/ battery plate/ body mount/ 3x8 flat-head screws (4)/ 2.5x6 CS (10) (for clipless body mounting)
8081	Fender extensions (4)/ 3x8 flathead screws (24) (requires #8080 narrow inner fenders)
8082	Installation kit, Pro Scale® Advanced Lighting Control System, TRX-4® Chevrolet Blazer (1979) (includes mount, reverse lights harness, hardware)
8083	Installation kit, Pro Scale® Advanced Lighting Control System, TRX-4® Sport (includes mount, rear lens, reverse lights and turn signal harnesses, hardware)
8084	LED headlight/tail light kit (fits #8111 or #8112 body, requires #8028 power supply)
8085	LED light set, complete with power supply (contains headlights, tail lights, & distribution block) (fits #8111 or #8112 body)
8085X	Pro Scale® LED light set, TRX-4® Sport, complete with power module (contains headlights, tail lights, & distribution block) (fits #8111 or #8112 body)
8086	LED expedition rack scene light kit (fits #8111 or 8213 series bodies, requires #8028 power supply)
8087	LED light bar, roof lights (fits #8111 or 8213 series bodies, requires #8028 power supply)
8088	LED light bar, front bumper (fits #8866 front bumper, requires #8028 power supply)
8089	4-in-2 wire harness, LED light kit
8090	LED light set, complete with power supply (contains headlights, tail lights, side marker lights, & distribution block) (fits #9111 or 9112 body)
8091	Installation kit, Pro Scale® Advanced Lighting Control System, TRX-4® Chevrolet Blazer (1969 & 1972) (includes mount, reverse lights and turn signal harnesses, hardware)
8111	Body, TRX-4® Sport (clear, trimmed, requires painting)/ window masks/ decal sheet (includes grille, side mirrors, door handles, windshield wipers, expedition rack, & clipless mounting) (requires #8080X inner fenders)
8111R	Body, TRX-4® Sport (clear, trimmed, die-cut for LED light kit, requires painting)/ window masks/ decal sheet
8112	Body with camper, TRX-4® Sport (clear, trimmed, requires painting)/window masks/ decal sheet
8113	Decal Sheet, TRX-4® Sport
8115	Body posts, front & rear
8116	Grille/ grille retainers (2)/ grille mount/ lens (2)/ 2.5x8 BCS (6) (fits #8111 or #8112 body)
8117	Tailgate panel/ tailgate retainers (2)/ tailgate mount/ tail light lens (2) (left & right)/ 2.5x8 BCS (4) (fits #8111 or #8112 body)
8118	Spare tire mount/ mounting hardware
8119	Mirrors, side (left & right)/ snorkel/ mounting hardware (fits #8111 or #8112 body)
8120	Expedition rack/ mounting hardware (fits #8111 or #8111R body)
8120A	Expedition rack/ mounting hardware (fits #8111, 8111R, or 8213 series bodies)
8120R	Expedition rack, complete (includes traction boards, shovel, axe, jack, fire extinguisher, fuel cans, & mounting hardware) (fits #8111, 8111R, or 8213 series bodies)
8120X	Expedition rack, complete (includes traction boards, shovel, axe, jack, fire extinguisher, fuel cans, & mounting hardware) (fits #8111 or #8111R body)
8121	Traction boards/ mounting hardware
8121A	Traction boards, yellow/ mounting hardware
8121G	Traction boards, green/ mounting hardware
8121X	Traction boards, blue/ mounting hardware
8122	Shovel/ axe/ accessory mount/ mounting hardware
8122-BLK	Shovel/ axe (black)/ accessory mount/ mounting hardware
8124	Bumper, front (178mm wide)/ winch/ 2.6x8 BCS	1
8125	Bumper, rear (176mm wide)
8126	Body, Chevrolet Blazer (1979), complete (clear, requires painting) (includes grille, side mirrors, door handles, windshield wipers, front & rear bumper, decals, clipless mounting) (requires #8072X inner fenders) side mirrors, door handles, windshield wipers, front & rear bumper, decals, clipless mounting) (requires #8072X inner fenders) side mirrors, door handles, windshield wipers, front & rear bumper, decals, clipless mounting) (requires #8072X inner fenders)
8126-BLK	Body, Chevrolet Blazer (1979), complete (black) (includes grille, side mirrors, door handles, windshield wipers, front & rear bumper, decals, clipless mounting) (requires #8072X inner fenders)
8126-RED	Body, Chevrolet Blazer (1979), complete (red) (includes grille, side mirrors, door handles, windshield wipers, front & rear bumper, decals, clipless mounting) (requires #8072X inner fenders)
8131	Decal sheet, Chevrolet Blazer	1979
8132	Door handles, left, right & rear tailgate/ windshield wipers, left & right/ retainers (2)/ 1.6x5 BCS (self-tapping) (7) (fits #8130 series bodies)
8133	Mirrors, side, chrome (left & right)/ o-rings (4)/ body clips (4) (fits #8126 series bodies)
8133X	Mirrors, side (folding) (fits #8126 series bodies)
8134	Grille, Chevrolet Blazer or K10 Truck (1979)/ grille retainers (4)/ headlight housing (2)/ lens (2)/ 2.6x8 BCS (4)/ 2.5x6 BCS (2) (fits #8126 or 9212 series bodies)
8135	Tail lights, left & right (assembled)/ tail light retainers, left & right/ side marker lights (assembled) (2)/ side marker retainers (2)/ mounting tape (2)/ 1.6x5 BCS (self-tapping) (4)/ 2.6x8 BCS (2) (fits #8126 or 9212 series bodies)
8136	Bumper, rear (chrome)/ bumper mount/ 3x10 BCS	2
8137	Bumper, front (chrome)/ bumper mount/ 3x10 BCS	2
8138	Push bar, bumper, chrome (assembled) (fits #8137 bumper)
8139	Half shafts, center (external splined) (2)/ pin retainer (4) (plastic parts only)
8140	Long arm lift kit, TRX-4®, complete
8140-GRN	Long arm lift kit, TRX-4®, complete (includes green powder coated links, green-anodized shocks)
8140R	Long arm lift kit, TRX-4®, complete (includes red powder coated links, red-anodized shocks)
8140X	Long arm lift kit, TRX-4®, complete (includes blue powder coated links, blue-anodized shocks) coated links, green-anodized shocks)
8141	Servo mount, steering (for use with TRX-4® Long Arm Lift Kit)
8142	Suspension links, rear upper (2) (5x115mm, steel) (assembled with hollow balls) (for use with #8140 TRX-4® Long Arm Lift Kit)
8142R	Suspension links, rear upper, red (2) (5x115mm, powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4® Long Arm Lift Kit) beadlock style wheels, Canyon Trail 5.3x2.2" tires) (2) beadlock style wheels, Canyon Trail 5.3x2.2" tires) (2) beadlock style wheels, Canyon Trail 5.3x2.2" tires)	2
8143	Suspension links, front lower (2) (5x104mm, steel) (assembled with hollow balls) (for use with #8140 TRX-4® Long Arm Lift Kit)
8143R	Suspension links, front lower, red (2) (5x104mm, powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4® Long Arm Lift Kit)
8144	Suspension link, front upper, 5x68mm (1) (steel) (assembled with hollow balls) (for use with #8140 TRX-4® Long Arm Lift Kit)
8144R	Suspension link, front upper, 5x68mm (1) (red powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4® Long Arm Lift Kit)
8144X	Suspension link, front upper, 5x68mm (1) (blue powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4® Long Arm Lift Kit)
8145	Suspension links, rear lower (2) (5x115mm, steel) (assembled with hollow balls) (for use with #8140 TRX-4® Long Arm Lift Kit)
8145R	Suspension links, rear lower, red (2) (5x115mm, powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4® Long Arm Lift Kit)
8145X	Suspension links, rear lower, blue (2) (5x115mm, powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4® Long Arm Lift Kit)
8146R	Steering link, 5x117mm (1)/ drag link, 5x60mm (1)/ panhard link, 5x63mm (red powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4® Long Arm Lift Kit)
8146X	Steering link, 5x117mm (1)/ drag link, 5x60mm (1)/ panhard link, 5x63mm (blue powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4® Long Arm Lift Kit)
8147	Cable, T-lock, medium (134mm) (for use with TRX-4® Long Arm Lift Kit)
8148	Cable, T-lock, x-long (173mm) (for use with TRX-4® Long Arm Lift Kit)
8149	Rod ends, extended (standard (4), angled (4))/ hollow balls (8) (for use with TRX-4® Long Arm Lift Kit)
8150	Driveshaft extension kit, center (includes internal splined, x-long (2), internal splined, long (1) and internal splined, medium (1)) (for use with TRX-4® Long Arm Lift Kit)
8151	Hardware kit, stainless steel, TRX-4® High Lift Kit (contains all stainless steel hardware used on TRX-4® High Lift Kit)
8153	Springs, shock, long (natural finish) (GTS) (0.29 rate, white stripe) (for use with TRX-4® Long Arm Lift Kit)
8154	Springs, shock, long (natural finish) (GTS) (0.39 rate, orange stripe) (for use with TRX-4® Long Arm Lift Kit)
8155	Springs, shock, long (natural finish) (GTS) (0.47 rate) (included with TRX-4® Long Arm Lift Kit)
8156	Springs, shock, long (natural finish) (GTS) (0.54 rate, green stripe) (for use with TRX-4® Long Arm Lift Kit)
8157	Springs, shock, long (natural finish) (GTS) (0.62 rate, blue stripe) (for use with TRX-4® Long Arm Lift Kit)
8160	Shocks, GTS, silver aluminum (assembled without springs) (4) (for use with #8140 TRX-4® Long Arm Lift Kit)
8160-GRN	Shocks, GTS, aluminum (green-anodized) (assembled without springs) (4) (for use with #8140 TRX-4® Long Arm Lift Kit)
8160R	Shocks, GTS, aluminum (red-anodized) (assembled without springs) (4) (for use with #8140R TRX-4® Long Arm Lift Kit)
8160X	Shocks, GTS, aluminum (blue-anodized) (assembled without springs) (4) (for use with #8140X TRX-4® Long Arm Lift Kit)
8161	Shock shaft, 3x57mm (GTS) (2) (includes bump stops) (for use with TRX-4® Long Arm Lift Kit)
8162	Body, GTS shock, long (silver aluminum) (1) (for use with #8140 TRX-4® Long Arm Lift Kit)
8162R	Body, GTS shock, long (aluminum, red-anodized) (1) (for use with #8140R TRX-4® Long Arm Lift Kit)
8163	Wheels, 2.2", classic chrome (2)/ center caps (front (2), rear (2)) (requires #8255A extended thread stub axle)
8164	Center caps, wheel (chrome) (4)/ decal sheet (requires #8255A extended thread stub axle)
8164X	Center caps, wheel (chrome) (front (2), rear (2)) (requires #8255A extended stub axle)
8165	Wheels, 1.9", chrome (2)/ center caps (2)/ decal sheet (requires #8255A extended thread stub axle)
8166	Tires & wheels, assembled, glued (1.9" chrome wheels, Canyon Trail 4.6x1.9" tires) (2)/ center caps (2)/ decal sheet (requires #8255A extended thread stub axle)
8166X	Tires & wheels, assembled, glued (1.9" chrome wheels, Canyon Trail 4.6x1.9" tires) (4)/ center caps (4)/ decal sheet (requires #8255A extended thread stub axle)
8167	Screws, 2x10mm cap-head, self-tapping (hex drive)	10
8167X	Hardware kit, stainless steel, beadlock rings (contains stainless steel hardware for 4 wheels)
8168	Beadlock rings, satin (2.2") (aluminum)(4)/ 2x10 CS	48
8168G	Beadlock rings, green (2.2") (aluminum) (4)/ 2x10 CS	48
8168R	Beadlock rings, red (2.2") (aluminum) (4)/ 2x10 CS	48
8168T	Beadlock rings, black (2.2") (aluminum) (4)/ 2x10 CS	48
8168X	Beadlock rings, blue (2.2") (aluminum) (4)/ 2x10 CS	48
8169	Beadlock rings, satin (1.9") (aluminum) (4)/ 2x10 CS	48
8169R	Beadlock rings, red (1.9") (aluminum) (4)/ 2x10 CS	48
8169T	Beadlock rings, black (1.9") (aluminum) (4)/ 2x10 CS	48
8169X	Beadlock rings, blue (1.9") (aluminum) (4)/ 2x10 CS	48
8170	Tires, Canyon Trail 5.3x2.2 ™ / foam inserts (2) (for use with TRX- 4 Long-Arm Lift Kit)
8171	Wheels, Method 105 2.2" (black chrome, beadlock) (beadlock rings sold separately) (for use with TRX-4 Long Arm Lift Kit)
8171A	Wheels, Method 105 2.2" (charcoal gray, beadlock) (beadlock rings sold separately) (for use with TRX-4 Long Arm Lift Kit)
8172	Tires and wheels, assembled (Method 105 2.2 ™ black chrome beadlock wheels, Canyon Trail 5.3x2.2 left, 1 right) (for use with TRX-4 Long Arm Lift Kit)
8173	Wheels, 1.9", Method Race Wheels® 105 Beadlock (black chrome, beadlock) (beadlock rings sold separately)
8173A	Wheels, 1.9", Method Race Wheels® 105 Beadlock (charcoal gray, beadlock) (beadlock rings sold separately)
8174	Tires & wheels, assembled (Method Race Wheels® 105 Beadlock 1.9" black chrome beadlock wheels, Canyon Trail 4.6x1.9" tires, foam inserts) (1 left, 1 right)
8175	Wheels, 1.9", chrome (2)/ center caps (2)/ decal sheet (requires #8255A extended thread stub axle)
8176	Center caps, wheel (chrome) (4)/ decal sheet (requires #8255A extended thread stub axle)
8177	Tires & wheels, assembled, glued (1.9" chrome wheels, Canyon Trail 4.6x1.9" tires) (2)/ center caps (2)/ decal sheet (requires #8255A extended thread stub axle)
8179	Tires & wheels, assembled, glued (TRX-4® Sport 1.9" wheels, Canyon Trail 4.6x1.9" tires) (2) beadlock style wheels, Canyon Trail 5.3x2.2" tires) (2) beadlock style wheels, Canyon Trail 5.3x2.2" tires) (2) beadlock style wheels, Canyon Trail 5.3x2.2" tires) (2) Tires & wheels, assembled, glued (TRX-4® Sport black, satin chrome beadlock 1.9" wheels, Canyon Trail 4.6x1.9" tires)	2
8180	Wheels, TRX-4® Sport 2.2	2
8180-GRN	Wheels, TRX-4® Sport 2.2 (gray, green beadlock style)	2
8180-RED	Wheels, TRX-4® Sport 2.2 (gray, red beadlock style)	2
8181	Tires and wheels, assembled, glued (TRX-4® Sport 2.2 ™ wheels, Canyon Trail 5.3x2.2 Lift Kit)
8181-GRN	Tires & wheels, assembled, glued (TRX-4® Sport 2.2" gray, green beadlock style wheels, Canyon Trail 5.3x2.2" tires)	2
8181-RED	Tires & wheels, assembled, glued (TRX-4® Sport 2.2" gray, red beadlock style wheels, Canyon Trail 5.3x2.2" tires)	2
8182	Tires & wheels, assembled (Method Race Wheels® 105 Beadlock 1.9" satin black chrome, blue beadlock style wheels, Canyon Trail 4.6x1.9" tires, foam inserts) (1 left, 1 right)
8183X	Tires & wheels, assembled, glued (1.9" classic chrome wheels, Canyon Trail 4.6x1.9" tires) (4)/ center caps (4)/ decal sheet (requires #8255A extended thread stub axle)
8188	Body, Ford Bronco, complete (black) (includes front and rear bumpers, push bar, rear body mount, grille, side mirrors, door handles, windshield wipers, spare tire mount, red and sunset decals) (requires #8072X inner fenders) (for clipless mounting)
8195	Differential, locking, front and rear (assembled) (includes T-Lock cables and servos)
8196	Two speed conversion kit
8211X	Body, Tactical Unit, night camo (painted)/ decals
8213	Body, TRX-4® Sport (clear, trimmed, die-cut for clipless mounting, requires painting)/ window masks/ decal sheet (includes grille, side mirrors, door handles, windshield wipers, expedition rack, & clipless mounting) (requires #8080X inner fenders) (includes grille, side mirrors, door handles, windshield wipers, expedition rack, & clipless mounting) (requires #8080X inner fenders)
8213-RED	Body, TRX-4® Sport, complete, red (painted, decals applied) (includes grille, side mirrors, door handles, windshield wipers, expedition rack, & clipless mounting) (requires #8080X inner fenders)
8214	Ball bearing kit, stainless steel, TRX-4® (complete)
8215	Body mounts & posts, front & rear (complete set)
8216	Shock towers, front & rear (left & right)
8217	Hardware kit, TRX-4® (contains all hardware used on TRX-4®)
8218	Floor pans, left & right
8219	Rock sliders, left & right
8220	Chassis rails, 448mm (steel) (left & right)
8221	Screw pin, 3x10mm	6
8222	Battery strap (for use with 2200mAh 2-cell and 1400mAh 3-cell LiPo batteries)
8223	Battery plate/ battery strap/ 3x8 flathead screws (4) (requires #8072 inner fenders)
8224	Box, receiver (sealed)/ wire cover/ foam pads/ silicone grease/ 3x8 BCS (5)/ 2.5x8 CS	2
8224X	Receiver box cover (for use only with #8224 receiver box & #2260 BEC)/ foam pads/ seals/ silicone grease
8225	Seal kit, receiver box (includes o-ring, seals, and silicone grease)
8226	Tray, battery
8227	Axle mount set (complete) (front & rear) (for suspension links)
8228	Axle shaft, front (left)/ drive pin/ cross pin
8229	Axle shaft, front (right)/ drive pin/ cross pin
8230	Axle shaft, rear (left)
8231	Axle shaft, rear (right)
8232	Caster blocks (portal drive), left & right
8232A	Caster blocks, 6061-T6 aluminum (charcoal gray-anodized), left and right
8232G	Caster blocks, 6061-T6 aluminum (green-anodized), left and right
8232R	Caster blocks, 6061-T6 aluminum (red-anodized), left and right
8232X	Caster blocks, 6061-T6 aluminum (blue-anodized), left and right
8233	Cross pin (2)/ drive pin (2) (to rebuild front axle shafts)
8234	Bumper D-Rings, grey (front or rear)/ 2.0x12 CS	4
8234R	Bumper D-rings, red (front or rear)/ 2.0x12 CS	4
8235	Bumper, front/ winch/ 2.6x8 BCS	1
8236	Bumper, rear
8237	Bumper mounts, front & rear/ screw pins	4
8238	Skidplate/ lower gear cover
8239	Servo mount, steering/ chassis crossmember
8240X	Servo mount, 2-speed/ servo mount, T-Lock/ wire clips
8241	Axle housing, front
8242	Axle housing, intermediate (TRX-6 ™ ) or rear (TRX-4®)
8243	Suspension link, front, 5x100mm (lower) (steel)	2
8244	Suspension link, front, 5x63mm (upper) (steel)	2
8245	Suspension link, rear, 5x121mm (upper or lower) (steel)	2
8246	Steering link, 5x60mm (1)/ draglink, 5x117mm (1) (steel)
8247X	Servo horn, steering, metal/ 3x14 BCS	1
8248	Suspension link, rear, 5x109mm (upper or lower) (steel)	2
8249	Slipper eliminator plate
8250	8250
8250X	Half shafts, center (internal splined, short (3) & internal splined, long (2))
8251	Portal drive housing, outer (front or rear)	2
8251A	Portal housings, outer, 6061-T6 aluminum (charcoal gray- anodized) (2)/ 2.5x10 CS	12
8251G	Portal housings, outer, 6061-T6 aluminum (green-anodized) (2)/ 2.5x10 CS	12
8251R	Portal housings, outer, 6061-T6 aluminum (red-anodized) (2)/ 2.5x10 CS	12
8251X	Portal housings, outer, 6061-T6 aluminum (blue-anodized) (2)/ 2.5x10 CS	12
8252	Portal drive housing, inner, front (left & right)/ 2.5x4 BCS	6
8252A	Portal housings, inner (front), 6061-T6 aluminum (charcoal gray- anodized) (2)/ 3x12 BCS	2
8252G	Portal housings, inner (front), 6061-T6 aluminum (green- anodized) (2)/ 3x12 BCS	2
8252R	Portal housings, inner (front), 6061-T6 aluminum (red-anodized) (2)/ 3x12 BCS	2
8252X	Portal housings, inner (front), 6061-T6 aluminum (blue-anodized) (2)/ 3x12 BCS	2
8253	Portal drive housing, inner, rear (left or right)	2
8253A	8253A
8253R	8253R
8253X	8253X
8254	Rebuild kit, slipper clutch (steel disc (2)/ friction insert (2)/ 4.0mm NL (1)/ spring washers (2))
8255	Stub axle (portal drive)	2
8255A	Stub axle, extended thread (portal drive)	2
8256	Portal drive axle mount, rear (left & right)
8256A	Portal drive axle mount, rear, 6061-T6 aluminum (charcoal gray- anodized) (left and right)/ 2.5x16 CS	4
8256R	Portal drive axle mount, rear, 6061-T6 aluminum (red-anodized) (left and right)/ 2.5x16 CS	4
8256X	Portal drive axle mount, rear, 6061-T6 aluminum (blue-anodized) (left and right)/ 2.5x16 CS	4
8257	Portal drive input gear, front/ drive pin/ cross pin
8258	Portal drive output gear, front or rear
8258X	8258X
8259	Portal drive input gear, rear
8259R	8259R
8260	Shocks, GTS, silver aluminum (assembled with spring retainers)	2
8260A	Shocks, GTS, blue-anodized (assembled with spring retainers)	2
8260G	Shocks, GTS, green-anodized (assembled with spring retainers)	2
8260R	Shocks, GTS, red-anodized (assembled with spring retainers)	2
8260X	Shocks, GTS hard-anodized, PTFE-coated aluminum bodies with TiN shafts (assembled with spring retainers)	2
8261	Piston, damper (red) (4)/ e-clips	8
8262	Rebuild kit, TRX-4® shocks (x-rings, o-rings, pistons, bushings, e clips, rod ends, and travel limiters)
8263	Shock shaft, 3x47mm (GTS)	2
8263T	Shock shaft, 3x47mm (GTS) (titanium nitride-coated)	2
8264	Caps & spring retainers, GTS shocks (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))
8265	Ball bearing kit, TRX-4® (complete)
8266	Body, GTS shock (aluminum, silver-anodized)	1
8266A	8266A
8266R	8266R
8266X	Body, GTS shock (hard-anodized, PTFE-coated aluminum)	1
8267	Weight, portal housing, brass (2) (34 grams)/ 2.5x8 CS (6) (requires #8251X, 8251R, 8251A, or 8251G outer portal housing)
8268	Wheels, TRX-4® Tactical 1.9	2
8269	Wheel hubs, 12mm hex (2)/ stub axle pins (2) (steel)
8269A	Wheel hubs, 12mm hex, 6061-T6 aluminum (charcoal gray- anodized) (4)/ 3x10 screw pin	4
8269G	Wheel hubs, 12mm hex, 6061-T6 aluminum (green-anodized) (4)/ 3x10 screw pin	4
8269R	Wheel hubs, 12mm hex, 6061-T6 aluminum (red-anodized) (4)/ 3x10 screw pin	4
8269X	Wheel hubs, 12mm hex, 6061-T6 aluminum (blue-anodized) (4)/ 3x10 screw pin	4
8270	Tires, Canyon Trail 4.6x1.9" (S1 compound)/ foam inserts	2
8271	Wheels, TRX-4® 1.9	2
8271X	Wheels, TRX-4® 1.9 (satin beadlock)	2
8272	Tires & wheels, assembled, glued (TRX-4® 1.9" wheels, Canyon Trail 4.6x1.9" tires)	2
8272X	Tires & wheels, assembled, glued (TRX-4® 1.9" satin beadlock wheels, Canyon Trail 4.6x1.9" tires)	2
8273	Tires & wheels, assembled, glued (Tactical 1.9" wheels, Canyon Trail 4.6x1.9" tires)	2
8274	Hollow ball set, complete, TRX-4® (aluminum, PTFE-coated)
8275	Rod end set, complete (standard (10), angled 10-degrees (8), offset (4))
8276	Rod ends	10
8277	Rod ends, angled 10-degrees	8
8278	Rod ends, offset	4
8279	Ring gear, differential/ pinion gear, differential
8279R	Ring gear, differential/ pinion gear, differential (machined)
8280	Differential cover, front or rear (grey)
8280-GRN	Differential cover, front or rear (green)
8280A	Differential cover, front or rear (black)
8280R	Differential cover, front or rear (red)
8280X	Differential cover, front or rear (chrome plated)
8281	Carrier, differential/ differential slider/ T-Lock fork
8282	Gear set, differential (output gears (2), spider gears (4), spider gear shaft (2))
8283	Cable, T-lock, short (124mm)
8284	Cable, T-lock, long (163mm)
8285	Gears, transfer case	3
8286	Output shafts (transfer case), front & rear
8287	Ring gear, differential/ pinion gear, differential (overdrive, machined)
8288	Ring gear, differential/ pinion gear, differential (underdrive, machined)
8289	Drive hub, 2-speed/ shift dog/ shift fork/ 2-speed linkage
8290	Plate, motor/ upper spur gear cover
8290A	Motor mount plate, 6061-T6 aluminum (charcoal gray-anodized)
8290G	Motor mount plate, 6061-T6 aluminum (green-anodized)
8290R	Motor mount plate, 6061-T6 aluminum (red-anodized)
8290X	Motor mount plate, 6061-T6 aluminum (blue-anodized)
8291	Gearbox housing (includes main housing, front housing, & cover)
8292	Input shaft/ output shaft (transmission)
8293	8293
8293X	Gear set, transmission, metal (includes 18T, 30T input gears, 36T output gear, 2x9.8 pins (5))
8294	Output gear, high range, 24T (metal)
8295	Output drive, transmission or differential (pin retainer (1)/ drive cup (1)/ drive ball (1)/ drive pin (1)/ 3x10 screw pin (1)/ cross pin (black) (1) 3x6 BCS with threadlock (1))
8296	Transmission gears, single speed, metal
8297	Spool/ differential housing plug/ e-clip/ 2.5x8mm BCS (with threadlock)	4
8298	Hardware kit, stainless steel, TRX-4® (contains all stainless steel hardware used on TRX-4®)
8299	Screws, 2.6x12mm button-head, self-tapping (hex drive)	6
8327	Battery hold-down/ battery clip/ hold-down post/screw pin (for 256mm wheelbase)
8327-BLUE	Battery hold-down, 6061-T6 aluminum (blue-anodized)
8327-GRAY	Battery hold-down, 6061-T6 aluminum (gray-anodized)
8327-GRN	Battery hold-down, 6061-T6 aluminum (green-anodized)
8327-ORNG	Battery hold-down, 6061-T6 aluminum (orange-anodized)
8327-RED	Battery hold-down, 6061-T6 aluminum (red-anodized)
8347	Nuts, 4mm flanged nylon locking, serrated (black)	10
8422	Fire extinguisher, red	2
8422-BLK	Fire extinguisher, black	2
8459	Spring retainers, lower (captured) (4)/ 2.5x10 CS (4)	4
8710	Speed Bit Master Set, hex and nut driver, 13-piece, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm), (ball- end: 2.0mm, 2.5mm, 3.0mm), and nut drivers (4.0mm, 4.5mm, 5.0mm, 5.5mm, 7.0mm, 8.0mm), 1/4” drive
8711	Speed Bit Master Set, hex driver, 7-piece straight and ball end, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm, 3.0mm) (ball end: 2.0mm, 2.5mm, 3.0mm), 1/4" drive
8712	Speed Bit Essentials Set, hex and nut driver, 7-piece, includes premium handle (medium), travel pouch, hex drivers (straight: 1.5mm, 2.0mm, 2.5mm) and nut drivers (5.0mm, 5.5mm, 7.0mm, and 8.0mm), 1/4” drive
8714	Speed Bit Set, screwdriver, 3-piece straight (3mm slotted, #1 Phillips, and #2 Phillips bits), 1/4" drive
8715	Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm, 2.5mm), 1/4" drive
8715X	Speed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm, 2.5mm, 3.0mm), 1/4" drive
8716	Speed Bit Set, hex driver, 2-piece ball-end (2.0mm, 2.5mm), 1/4" drive
8716X	Speed Bit Set, hex driver, 3-piece ball-end (2.0mm, 2.5mm, 3.0mm) 1/4" drive
8719	Speed Bit Master Set, nut driver, 6-piece, includes premium handle (medium), travel pouch, and nut drivers (4.0mm, 4.5mm, 5.0mm, 5.5mm, 7.0mm, 8.0mm), 1/4" drive
8720	Speed bit handle, large (overmolded)
8721	Speed bit handle, medium (one piece)
8722	Speed bit handle, premium (rubber overmold)
8811	Body, Mercedes-Benz® G 500® (clear, requires painting)/ decals/ window masks (includes rear body post, grille, side mirrors, door handles, windshield wipers)
8811R	8811R
8812	Decals, Mercedes-Benz® G 500®
8813	8813
8813X	Grille, Mercedes-Benz® G 500® 4x4²/grille mount & insert/lens, headlight (2 ea)/reflector (2)/bumperette & mounts, front (2 ea)/turn signal housing & lens (2 ea)/ hardware (fits #8811/8825 body)
8814X	Tail light lens (2)/ tail light housing (2)/ tail light housing mount (2)/ reverse lens (2)/ 1.6x5 BCS (4) (left & right)
8815	8815
8815X	8815X
8816X	Side marker light housing (2)/ mount (2)/ lens (2)/ 1.6x7 BCS (self-tapping)	2
8817	Mirrors, side, black (left & right)/ o-rings (4)/ windshield wipers, left, right, & rear/ wiper retainers (2)/ body clips (4)/ 1.6x5 BCS (self-tapping)	3
8818	8818
8819	8819
8820	8820
8821	8821
8822	Roof visor/ visor retainer/ visor lens (2)/ 2.6x6 BCS (3)/ 3x4 GS	4
8855	Winch kit with wireless controller, TRX-4® and TRX-6®
8856	Winch, TRX-4® and TRX-6® (requires #8857 wireless remote)
8857	Wireless remote, winch, TRX-4® and TRX-6®
8858	Housings (front & rear), winch/ decal
8859	Fairlead, winch
8860	Spool shaft assembly, winch
8861	Spool, winch
8862	Gearmotor, winch
8863	Hook, winch (steel)/ line retainer/ washer
8864	Line, winch (gray)
8864R	Line, winch (red)
8864X	Line, winch (blue)
8867	Bumper, front, winch, medium (includes bumper mount, D- Rings, fairlead, hardware) (fits TRX-4® 1979 Bronco and 1979 Blazer with 8855 winch) (217mm wide)
8870A	Fairlead, winch, aluminum (gray-anodized) (use with front bumpers #8865, 8866, 8867, 8869, or 9224)
8870G	Fairlead, winch, aluminum (green-anodized) (use with front bumpers #8865, 8866, 8867, 8869, or 9224)
8870R	Fairlead, winch, aluminum (red-anodized) (use with front bumpers #8865, 8866, 8867, 8869, or 9224)
8870T	Fairlead, winch, aluminum (orange-anodized) (use with front bumpers #8865, 8866, 8867, 8869, or 9224)
8870X	Fairlead, winch, aluminum (blue-anodized) (use with front bumpers #8865, 8866, 8867, 8869, or 9224)
8872	8872
8873	8873
8880	Traxx®, TRX-4® (4) (complete set, front & rear) For orders, calls outside the U.S., and other information, call 972-549-3000,
8881	Traxx®, front, left (assembled) (requires #8887 stub axle, #7061 GTR shock, & #8895 rubber track)
8882	Traxx®, front, right (assembled) (requires #8887 stub axle, #7061 GTR shock, & #8895 rubber track)
8883	Traxx®, rear, left (assembled) (requires #8887 stub axle, #7061 GTR shock, & #8896 rubber track)
8884	Traxx®, rear, right (assembled) (requires #8887 stub axle, #7061 GTR shock, & #8896 rubber track)
8885	Shock mounts (frame, left (2), frame, right (2))/ portal mounts (1 each, front (left & right), rear (left & right))
8886	Stub axle nut	4
8887	Stub axle	1
8888	Spring	4
8889	Bearing retainers, inner (2)/ outer	2
8890	Drive wheel	1
8891	Tension wheels (6)/ road wheels	4
8893	Installation kit, Pro Scale® Advanced Lighting Control System, TRX-4® Mercedes® G 500® & G 63® (includes mount, rear bumper lens, turn signal, reverse light, & fog light harnesses, hardware)
8898	LED light set, complete with power supply (contains headlights, tail lights, roof lights, & distribution block) (fits #8811 body)
8898X	Pro Scale® LED light set, TRX-4® Mercedes® G 500® & G 63®, complete with power module (contains headlights, tail lights, roof lights, & distribution block) (fits #8811 or 8825 body)
8899	LED light set (contains headlights, tail lights, roof lights, and distribution block) (fits #8811 body, requires #8028 power supply)
9010	Body reinforcement set (fits #9011 body)
9011	Body, Hoss® 4X4 VXL (clear, requires painting)/ window, grille, lights decal sheet
9011A	Body, Hoss® 4X4 VXL, orange (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)
9011G	Body, Hoss® 4X4 VXL, green (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)
9011R	Body, Hoss® 4X4 VXL, Solar Flare (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)
9011X	Body, Hoss® 4X4 VXL, ProGraphix® (Graphics are printed, requires paint & final color application)/ window, grille, lights decal sheet
9012	Tailgate protector/ 3x10mm flat-head screw	3
9013	Body support/ 3x12mm CS (4) / (fits #9011 body)
9015	Body mounts, front & rear/ 3x12mm CS (4)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (6)/ 3x12mm BCS	1
9017	Skid plate, roof (body) (black) (left & right)/ 3x8mm CS	4
9023	Nerf bars, chassis	2
9026	Battery hold-down (2)/ battery clip/ hold-down post/ screw pin/ pivot post screw pin/ pivot post screw
9031	Turnbuckles, camber link, 91mm (80mm center to center) (assembled with rod ends and hollow balls)	2
9032	Caster blocks (c-hubs), extreme heavy duty, black (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
9032-GRAY	Caster blocks (c-hubs), extreme heavy duty, gray (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
9032G	Caster blocks (c-hubs), extreme heavy duty, green (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
9032R	Caster blocks (c-hubs), extreme heavy duty, red (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
9032T	Caster blocks (c-hubs), extreme heavy duty, orange (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
9032X	Caster blocks (c-hubs), extreme heavy duty, blue (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
9035	Bumper, front/ bumper support
9036	Bumper, rear/ bumper mount, rear/ bumper support, rear Chassis (black)
9037	Steering blocks, extreme heavy duty, black (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
9037-GRAY	Steering blocks, extreme heavy duty, gray (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
9037G	Steering blocks, extreme heavy duty, green (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
9037R	Steering blocks, extreme heavy duty, red (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
9037T	Steering blocks, extreme heavy duty, orange (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
9037X	Steering blocks, extreme heavy duty, blue (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
9038	Shock tower, front, extreme heavy duty, black (for use with #9080 upgrade kit)
9038-GRAY	Shock tower, front, extreme heavy duty, gray (for use with #9080 upgrade kit)
9038G	Shock tower, front, extreme heavy duty, green (for use with #9080 upgrade kit)
9038R	Shock tower, front, extreme heavy duty, red (for use with #9080 upgrade kit) #9080 upgrade kit)
9038T	Shock tower, front, extreme heavy duty, orange (for use with #9080 upgrade kit)
9038X	Shock tower, front, extreme heavy duty, blue (for use with #9080 upgrade kit)
9039	Shock tower, rear, extreme heavy duty, black (for use with #9080 upgrade kit)
9039-GRAY	Shock tower, rear, extreme heavy duty, gray (for use with #9080 upgrade kit)
9039G	Shock tower, rear, extreme heavy duty, green (for use with #9080 upgrade kit)
9039R	Shock tower, rear, extreme heavy duty, red (for use with #9080 upgrade kit) #9080 upgrade kit)
9039T	Shock tower, rear, extreme heavy duty, orange (for use with #9080 upgrade kit)
9039X	Shock tower, rear, extreme heavy duty, blue (for use with #9080 upgrade kit)
9042	Suspension pin set, extreme heavy duty, complete (front and rear) (3x52mm (4), 3x32mm (2), 3x40mm (2)) (for use with #9080 upgrade kit)
9042X	Suspension pin set, extreme heavy duty, complete (front and rear) (hardened steel) (3x52mm (4), 3x32mm (2), 3x40mm (2))/ M2.5x0.45mm NL (8) (for use with #9080 upgrade kit)
9043	Screw pins, 3x16mm, extreme heavy duty (6) (for use with #9080 upgrade kit)
9050	Carriers, stub axle, rear, extreme heavy duty, black (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
9050-GRAY	Carriers, stub axle, rear, extreme heavy duty, gray (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
9050G	Carriers, stub axle, rear, extreme heavy duty, green (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
9050R	Carriers, stub axle, rear, extreme heavy duty, red (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
9050T	Carriers, stub axle, rear, extreme heavy duty, orange (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
9050X	Carriers, stub axle, rear, extreme heavy duty, blue (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)
9051	Driveshaft assembly, front, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with #9080 upgrade kit)
9051R	Driveshafts, front, extreme heavy duty, steel-spline constant- velocity with 6mm stub axles (complete assembly) (2) (for use with #9080 upgrade kit)
9052	Driveshaft assembly, rear, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with #9080 upgrade kit)
9052R	Driveshafts, rear, extreme heavy duty, steel-spline constant- velocity with 6mm stub axles (complete assembly) (2) (for use with #9080 upgrade kit)
9052X	Driveshafts, rear, steel-spline constant-velocity (complete assembly)	2
9053	Stub axle, rear, 6mm, extreme heavy duty (for use with #9052R steel CV driveshafts)
9053X	Stub axle, rear, steel-splined constant velocity	1
9054	Stub axle, front, 6mm, extreme heavy duty (for use with #9051R steel CV driveshafts)
9055	Stub axle assembly, rear, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft) (for use with #9080 upgrade kit)
9055X	Half shaft, external splined (steel-spline constant velocity)	1
9056	Stub axle assembly, front, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft) (for use with #9080 upgrade kit)
9056X	Half shaft, internal splined (steel-spline constant velocity)	1
9057	Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft) (for use with #9080 upgrade kit)
9057X	Differential output shafts, steel-splined constant-velocity	2
9058X	Rebuild kit, steel-splined constant-velocity driveshafts (includes pins and hardware for one axle shaft)
9059X	Cross pin (2)/ drive pin (2) (repairs 1 axle shaft)
9063-BLUE	Caster blocks (c-hubs), 6061-T6 aluminum (blue-anodized), left & right (for use with #9080 upgrade kit)
9063-GRAY	Caster blocks (c-hubs), 6061-T6 aluminum (gray-anodized), left & right (for use with #9080 upgrade kit)
9063-GRN	Caster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left & right (for use with #9080 upgrade kit)
9063-ORNG	Caster blocks (c-hubs), 6061-T6 aluminum (orange-anodized), left & right (for use with #9080 upgrade kit)
9063-RED	Caster blocks (c-hubs), 6061-T6 aluminum (red-anodized), left & right (for use with #9080 upgrade kit)
9064-BLUE	Steering blocks, 6061-T6 aluminum (blue-anodized), left & right (for use with #9080 upgrade kit)
9064-GRAY	Steering blocks, 6061-T6 aluminum (gray-anodized), left & right (for use with #9080 upgrade kit)
9064-GRN	Steering blocks, 6061-T6 aluminum (green-anodized), left & right (for use with #9080 upgrade kit)
9064-ORNG	Steering blocks, 6061-T6 aluminum (orange-anodized), left & right (for use with #9080 upgrade kit)
9064-RED	Steering blocks, 6061-T6 aluminum (red-anodized), left & right (for use with #9080 upgrade kit)
9065-BLUE	Carriers, stub axle, rear, 6061-T6 aluminum, left & right (blue- anodized) (for use with #9080 upgrade kit)
9065-GRAY	Carriers, stub axle, rear, 6061-T6 aluminum, left & right (gray- anodized) (for use with #9080 upgrade kit)
9065-GRN	Carriers, stub axle, rear, 6061-T6 aluminum, left & right (green- anodized) (for use with #9080 upgrade kit)
9065-ORNG	Carriers, stub axle, rear, 6061-T6 aluminum, left & right (orange-anodized) (for use with #9080 upgrade kit)
9065-RED	Carriers, stub axle, 6061-T6 aluminum, left & right (red- anodized) (for use with #9080 upgrade kit)
9069	Wheel hubs, 12mm hex (steel), extreme heavy duty (4)/ 2x9.8mm pin (4) (for use with #9080 upgrade kit and 6mm axles)
9072	Tires & wheels, assembled, glued (black chrome 2.8" wheels, Sledgehammer® tires, foam inserts) (2) (TSM® rated) Tires & wheels, assembled, glued (black wheels, dual profile tires, foam inserts) (nitro rear/ electric front)	2
9072-GRAY	Tires & wheels, assembled, glued (charcoal gray 2.8" wheels, Sledgehammer® tires, foam inserts) (2) (TSM® rated)
9076	Wheelie bar (assembled)
9077	Body, Rustler® 4X4 (clear, requires painting)/ window, grille, lights decal sheet/ body plastics
9077X	Body, Rustler® 4X4, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheet
9078X	Wheelie bar (assembled)
9079X	Body, StampedeÂ® 4X4 BL-3s, ProGraphixÂ® (graphics are printed, requires paint & final color application)/ decal sheet
9080	Outer Driveline & Suspension Upgrade Kit, extreme heavy duty, black
9080-GRAY	Outer Driveline & Suspension Upgrade Kit, extreme heavy duty, gray
9080G	Outer Driveline & Suspension Upgrade Kit, extreme heavy duty, green
9080R	Outer Driveline & Suspension Upgrade Kit, extreme heavy duty, red
9080T	Outer Driveline & Suspension Upgrade Kit, extreme heavy duty, orange
9080X	Outer Driveline & Suspension Upgrade Kit, extreme heavy duty, blue
9081	Housing, center differential/ x-ring gaskets (2)/ 5x10x0.5 PTFE- coated washer (1)/ 2.5x10 CCS	4
9083	Latch, body mount, front (1)/ rear (1) (for clipless body mounting) (attaches to #9077 body)
9084	Body mount, front (1)/ rear (1) (for clipless body mounting) (attaches to #9077 body)
9086	Wheel hubs, splined, 17mm, short (blue-anodized) (4)/ wheel nuts, splined, 17mm (blue-anodized) (4)/ hub retainer M4 X 0.7 (4)/ axle pin (4) (for use with #9080 upgrade kit)
9086-GRAY	Wheel hubs, splined, 17mm, short (gray-anodized) (4)/ wheel nuts, splined, 17mm (gray-anodized) (4)/ hub retainer M4 X 0.7 (4)/ axle pin (4) (for use with #9080 upgrade kit)
9086-GRN	Wheel hubs, splined, 17mm, short (green-anodized) (4)/ wheel nuts, splined, 17mm (green-anodized) (4)/ hub retainer M4 X 0.7 (4)/ axle pin (4) (for use with #9080 upgrade kit)
9086-ORNG	Wheel hubs, splined, 17mm, short (orange-anodized) (4)/ wheel nuts, splined, 17mm (orange-anodized) (4)/ hub retainer M4 X 0.7 (4)/ axle pin (4) (for use with #9080 upgrade kit)
9086-RED	Wheel hubs, splined, 17mm, short (red-anodized) (4)/ wheel nuts, splined, 17mm (red-anodized) (4)/ hub retainer M4 X 0.7 (4)/ axle pin (4) (for use with #9080 upgrade kit)
9087-BLUE	Wheel hub, splined, 17mm, short (blue-anodized) (1)/ wheel nut, splined, 17mm (blue-anodized) (1)/ hub retainer, M4 X 0.7 (1)/ axle pin (1) (for use with #9080 upgrade kit)
9087-GRAY	Wheel hub, splined, 17mm, short (gray-anodized) (1)/ wheel nut, splined, 17mm (gray-anodized) (1)/ hub retainer M4 X 0.7 (1)/ axle pin (1) (for use with #9080 upgrade kit)
9087-GRN	Wheel hub, splined, 17mm, short (green-anodized) (1)/ wheel nut, splined, 17mm (green-anodized) (1)/ hub retainer M4 X 0.7 (1)/ axle pin (1) (for use with #9080 upgrade kit)
9087-ORNG	Wheel hub, splined, 17mm, short (orange-anodized) (1)/ wheel nut, splined, 17mm (orange-anodized) (1)/ hub retainer M4 X 0.7 (1)/ axle pin (1) (for use with #9080 upgrade kit)
9087-RED	Wheel hub, splined, 17mm, short (red-anodized) (1)/ wheel nut, splined, 17mm (red-anodized) (1)/ hub retainer, M4 X 0.7 (1)/ axle pin (1) (for use with #9080 upgrade kit)
9090	Gear adapter, fixed
9090X	Gear adapter, fixed
9095	LED light set, complete (includes front and rear bumpers with LED lights, 3-volt accessory power supply, and power tap connector (with cable) (fits #6762 or 9011 series bodies)
9096	Bumper, front (with LED lights) (replacement for #9035 front bumper)
9097	Bumper, rear (with LED lights) (replacement for #9036 rear bumper)
9111	Body, Chevrolet Blazer (1972) (clear, requires painting) (includes grille, side mirrors, side trim, door handles, windshield wipers, decals, window masks) (includes grille, side mirrors, door handles, windshield wipers, front & rear bumpers, clipless mounting) (requires #8072X inner fenders) grille, side mirrors, door handles, windshield wipers, front & rear bumpers, clipless mounting) (requires #8072X inner fenders)
9111X	Body, Chevrolet Blazer (1972), complete, blue (painted) (includes grille, side mirrors, door handles, windshield wipers, front & rear bumpers, decals) grille, side mirrors, door handles, windshield wipers, front & rear bumpers, clipless mounting) (requires #8072X inner fenders)
9112	Body, Chevrolet Blazer (1969 - 1970) (clear, requires painting) (includes grille, side mirrors, door handles, windshield wipers, decals, window masks)
9113	Decal sheets, Chevrolet Blazer (1969 - 1972)
9114	Interior, Chevrolet Blazer (1969 -1972) (clear, requires painting) (includes rollbar, gauge bezel, steering wheel and column, shifter, armrest, decals) (fits #9111, 9112, 9130, or 9131 series bodies) (#9111 or 9112 series bodies require #9128 body cage for installation)
9114-BLK	Interior, Chevrolet Blazer (1969 -1972) (black) (includes rollbar, gauge bezel, steering wheel and column, shifter, armrest, decals) (fits #9111, 9112, 9130, or 9131 series bodies) (#9111 or 9112 series bodies require #9128 body cage for installation) bezel, steering wheel and column, shifter, armrest, decals) (fits #9111, 9112, 9130, or 9131 series bodies) (#9111 or 9112 series bodies require #9128 body cage for installation)
9115	Door handles, left, right, and rear/ retainers (3)/ windshield wipers, left & right/ retainer (1)/ fuel cap/ fuel flange/ fuel cap mount/ 1.6x5 BCS (self-tapping) (7)/ 2.6x8 BCS	1
9116	Marker light housing (4)/ marker light mount (4)/ marker light lens (red (2), amber (2))/ reverse lens (left & right)/ 1.6x5 BCS (self-tapping)	8
9117	Side trim, Chevrolet Blazer (1972), left & right/ rear trim, upper & lower/ retainers, left, right & rear/ 2.6x8 BCS (23)/ 1.6x5 BCS (self- tapping) (5) (fits #9111 body)
9118	Mirrors, side, chrome (left & right)/ o-rings (4)/ body clips (4) (fits #9111 body)
9119	Tail light housing, chrome (2)/ lens (2)/ retainers (left & right)/ 2.6x8 BCS (self-tapping)	4
9120	Grille, Chevrolet Blazer (1972)/ grille retainers (5)/ headlight housing (2)/ lens (2)/ 2.6x8 BCS (5)/ 2.5x6 BCS (4) (fits #9111 body)
9121	Mirrors, side, chrome (left & right)/ o-rings (4)/ body clips (4) (fits #9112 body)
9122	Tail light housing, black (2)/ lens (2)/ retainers (left & right)/ 2.6x8 BCS (self-tapping)	4
9123	Grille, Chevrolet Blazer (1969 - 1970)/ grille retainers (5)/ headlight housing (2)/ headlight lens (2)/ turn signal lens (2)/ hood emblem/ hood emblem mount/ 2.6x8 BCS (5)/ 2.5x6 BCS (4)/ 1.6x5 BCS (self-tapping) (2) (fits #9112 body)
9124	Bumper, rear (chrome)/ bumper mount/ 3x10 BCS	2
9125	Bumper pads/ bumper guards (chrome)/ 2.5x12 BCS (4)/ 2.7mm drill bit (fits #9126 or #9127 front bumpers)
9126	Bumper, front (chrome)/ bumper mount/ lens (left and right) (2)/ lens mount (left and right) (2)/ 3x10 BCS (2)/ 2.6x6 BCS	4
9127	Bumper, front (chrome)/ bumper mount/ 3x10 BCS	2
9130-RED	Body, Chevrolet Blazer (1972), complete, red (painted) (includes grille, side mirrors, door handles, windshield wipers, front & rear bumpers, clipless mounting) (requires #8072X inner fenders)
9131	Body, Chevrolet Blazer (1969) (clear, requires painting)/ decals/ window masks (includes grille, side mirrors, door handles, windshield wipers, clipless mounting, hardware) (requires #8072X inner fenders) (includes grille, side mirrors, door handles, windshield wipers, front & rear bumpers, clipless mounting) (requires #8072X inner fenders)
9131-BLK	Body, Chevrolet Blazer (1969), complete, black (painted) (includes grille, side mirrors, door handles, windshield wipers, front & rear bumpers, clipless mounting) (requires #8072X inner fenders)
9136	Caster blocks (c-hubs), extreme heavy duty, black (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit)
9136-BLUE	Caster blocks (c-hubs), extreme heavy duty, blue (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit) right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit) (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit)
9136-GRAY	Caster blocks (c-hubs), extreme heavy duty, gray (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit)
9136-GRN	Caster blocks (c-hubs), extreme heavy duty, green (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit) Caster blocks (c-hubs), extreme heavy duty, green (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit)
9136-ORNG	Caster blocks (c-hubs), extreme heavy duty, orange (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit) Caster blocks (c-hubs), extreme heavy duty, red (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit)
9136-RED	Caster blocks (c-hubs), extreme heavy duty, red (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit)
9136X	Caster blocks (c-hubs), extreme heavy duty, black (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit)
9137	Steering blocks, extreme heavy duty, black (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)
9137-BLUE	Steering blocks, extreme heavy duty, blue (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)
9137-GRAY	Steering blocks, extreme heavy duty, gray (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)
9137-GRN	Steering blocks, extreme heavy duty, green (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)
9137-ORNG	Steering blocks, extreme heavy duty, orange (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)
9137-RED	Steering blocks, extreme heavy duty, red (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)
9142	Suspension pin set, extreme heavy duty, complete (front and rear) (2.5x26mm (4), 3x32mm (2), 3x40mm (2), 3x46mm (2)) (for use with #9180, 9181, 9182 upgrade kit)
9150	Carriers, stub axle, rear, extreme heavy duty, black (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)
9150-BLUE	Carriers, stub axle, rear, extreme heavy duty, blue (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)
9150-GRAY	Carriers, stub axle, rear, extreme heavy duty, gray (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)
9150-GRN	Carriers, stub axle, rear, extreme heavy duty, green (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)
9150-ORNG	Carriers, stub axle, rear, extreme heavy duty, orange (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)
9150-RED	Carriers, stub axle, rear, extreme heavy duty, red (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)
9170-BLK	Tires & wheels, assembled, glued (2.8") (RXT black wheels, Sledgehammer® ST tires, foam inserts) (4WD front and rear, 2WD electric front only) (2) (TSM® rated)
9181	Outer Driveline & Suspension Upgrade Kit, extreme heavy duty, black (fits Slash® 2WD)
9181-BLUE	Outer Driveline & Suspension Upgrade Kit, extreme heavy duty, blue (fits Slash® 2WD)
9181-GRAY	Outer Driveline & Suspension Upgrade Kit, extreme heavy duty, gray (fits Slash® 2WD)
9181-GRN	Outer Driveline & Suspension Upgrade Kit, extreme heavy duty, green (fits Slash® 2WD)
9181-ORNG	Outer Driveline & Suspension Upgrade Kit, extreme heavy duty, orange (fits Slash® 2WD)
9181-RED	Outer Driveline & Suspension Upgrade Kit, extreme heavy duty, red (fits Slash® 2WD) Shock tower, rear (black) (fits Bandit® series)
9193	Camber links, rear (molded composite) (73mm center to center) (2) (assembled with hollow balls) (for use with #9181 upgrade kit)
9216	Latch, body mount (2)/ 3x8 BCS	8
9226	Body cage (fits #9212 body)
9228	Body mounts (front & rear)/ 3x10mm BCS (7) (fits #9212 body) side mirrors, door handles, windshield wipers, front & rear bumper, decals, clipless mounting) (requires #8072X inner fenders)
9233	Body cage, front & rear (fits #9230 body)
9234X	Body mounts, front & rear (fits #8188 & 9240 bodies)
9240	Body, Ford Bronco (1979), complete (clear, trimmed, requires painting) (includes grille, side mirrors, door handles, windshield wipers, spare tire mount, decals, window masks) (requires #8072X inner fenders) (for clipless mounting)
9275	9275
9288	9288
9454	Spur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch)
9456	Spur gear, 56-tooth (0.8 metric pitch, compatible with 32- pitch)
9461A	Wheels, wheelie bar, 6061-T6 aluminum (orange-anodized) (2)/ 5x8x2.5mm ball bearings (4)/ o-rings (2)/ 5x8x0.3mm TW	2
9461G	Wheels, wheelie bar, 6061-T6 aluminum (green-anodized) (2)/ 5x8x2.5mm ball bearings (4)/ o-rings (2)/ 5x8x0.3mm TW	2
9461P	Wheels, wheelie bar, 6061-T6 aluminum (pink-anodized) (2)/ 5x8x2.5mm ball bearings (4)/ o-rings (2)/ 5x8x0.3mm TW	2
9461R	Wheels, wheelie bar, 6061-T6 aluminum (red-anodized) (2)/ 5x8x2.5mm ball bearings (4)/ o-rings (2)/ 5x8x0.3mm TW	2
9461X	Wheels, wheelie bar, 6061-T6 aluminum (blue-anodized) (2)/ 5x8x2.5mm ball bearings (4)/ o-rings (2)/ 5x8x0.3mm TW	2
9463	Axle, wheelie bar, 6061-T6 aluminum (gray-anodized) (1)/ 3x12 BCS (with threadlock)	2
9463A	Axle, wheelie bar, 6061-T6 aluminum (orange-anodized) (1)/ 3x12 BCS (with threadlock)	2
9463G	Axle, wheelie bar, 6061-T6 aluminum (green-anodized) (1)/ 3x12 BCS (with threadlock)	2
9463P	Axle, wheelie bar, 6061-T6 aluminum (pink-anodized) (1)/ 3x12 BCS (with threadlock)	2
9463R	Axle, wheelie bar, 6061-T6 aluminum (red-anodized) (1)/ 3x12 BCS (with threadlock) (2) Battery hold-down (black)/ battery clip/ hold-down post/ screw pin (fits #5832-BLK, 5832-BLUE, 5832-DGRY or 5832-STGRY chassis) screw pin (fits #5832-BLK, 5832-BLUE, 5832-DGRY or 5832- STGRY chassis)
9463X	Axle, wheelie bar, 6061-T6 aluminum (blue-anodized) (1)/ 3x12 BCS (with threadlock)	2
9492	Idler gear, 30-tooth/ idler gear shaft (steel)
9494	Input gear, 22-tooth/ input shaft (transmission) (heavy duty) (fits Bandit®, Rustler®, Stampede®, Slash® 2WD)
9618	9618
9909	Traxxas® racing banner, red & black (3x7 feet)
9916	Backpack, RC car carrier, 12" x 12" x 24" (fits TRX-4 & similar)
9917	Duffel bag, medium, 30" x 12" x 12" (fits 1/10 Slash®, TRX- 4®, & similar)
9950	Official Team Traxxas® racing decal set(flag logo/ 6-color)
9965	9965