Hobbydex / RC cars / Categories / Pins and clips / Traxxas

Traxxas · Pins and clips

PartNameReleases
1633E-clips/ C-rings3
1726Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer10
1726AAntenna, tube, black (1)/ vinyl antenna cap (1)/ wire retainer5
1834Body Clips (12) (standard size)4
1834ABody clips, black (12) (standard size)3
2637Suspension pins, 31.5mm, chrome (2) w/ E-clips2
2640Suspension pins, 44mm (2) w/ E-clips (Use with tie bar to strengthen front bulkhead)2
2754Stub axle pins8
3740Suspension pins, 2.5x31.5mm (king pins) w/ E-clips (2) (strengthens caster blocks)2
3793Input shaft (slipper shaft) / spring pin3
3934Body clips, heavy duty4
3934ABody clips, heavy duty (black)2
3935Body clip (mounting clip), angled, 90-degrees1
3935ABody clip (mounting clip), angled, 90-degrees (black)1
4955Pins, axle (2.5x12mm)1
5552ARebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1))3
5854Hub retainer, 17mm hubs, M4 X 0.7 (4) (use with #5853X, #6856X, #6469)2
6537Wire retainers, gear cover/ 3x4mm BCS2
6757Rebuild kit, steel-splined constant-velocity driveshafts (includes pins, dustboots, lube, and hardware)3
6834Suspension pin set, complete (front and rear)3
6877Cover, gear/ motor wire hold-down clip1
6877-SLGRYCover, gear/ wire retainer (slate gray)1
6952Latch mounts/ retainers (front & rear, left & right) (fits #6958 body)2
6966Latch mounts/ retainers (front & rear, left & right)1
6992Skid pads, roof (left & right)/ retainers (left & right)/ 3x10mm CS (6) (fits #6958 body)2
6993Skid pads, tailgate (left & right)/ retainers (left (2), right (2))/ 3x10mm CS (6) (fits #6958 body)2
6994Side skirts (left & right)/ retainers (left & right)/ 3x8mm BCS (6) (fits #6958 body)2
7426Battery hold-down (1)/ hold-down retainer, front & rear (1 each)1
7426-SLGRYBattery hold-down (1)/ hold-down retainer, front & rear (slate gray)1
7426XBattery hold-down, tall (1)/ hold-down retainer, front & rear (1 each) (allows for installation of taller, multi-cell batteries)1
7468Caps and spring retainers, GTR long/xx-long shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))6
7468XCaps & spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))5
7477Cover, gear/ wire retainer2
7477-SLGRYCover, gear/ wire retainer (slate gray)2
7740Suspension pin set, front or rear corner (hardened steel), 4x85mm (1), 4x47mm (3), 4x33mm (2) (qty 4, #7740 required for complete set)1
7741Suspension pins, 4x85mm (hardened steel)1
7742Suspension pin set, shock mount (front or rear, hardened steel), 4x25mm (2), 4x38mm1
7743Suspension pin retainer1
7743-BLUESuspension pin retainer, 6061-T6 aluminum (blue-anodized)1
7743-GRAYSuspension pin retainer, 6061-T6 aluminum (gray-anodized)1
7743-GRNSuspension pin retainer, 6061-T6 aluminum (green-anodized)1
7743-ORNGSuspension pin retainer, 6061-T6 aluminum (orange-anodized)1
7743-REDSuspension pin retainer, 6061-T6 aluminum (red-anodized)1
7751XRebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies (for use only with #7750X driveshaft)1
7757Wheel hex clips1
7760Motor mounts (front and rear)/ pins1
7785XInput gear, transmission, 20-tooth/ 2.5x12mm pin1
7794Cush drive key/ pin/ elastomer damper1
8070Grille, Ford Bronco or F-150/ grille retainers (6)/ headlight housing (2)/ lens (2)/ 2.6x8 BCS (6)/ 2.5x6 BCS (2) (fits #8010 or 9230 series bodies)2
8073Mirrors, side, black (left & right)/ retainers (2)/ body clips (4) (fits #8010 or 9230 series bodies)2
8073XMirrors, side, chrome (left & right)/ retainers (2)/ body clips (4) (fits #8010 or 9230 series bodies)2
8076Side trim, left & right (chrome)/ retainers/ LED lens/ 2.6x8 BCS (24) (fits #8010 series bodies)2
8116Grille/ grille retainers (2)/ grille mount/ lens (2)/ 2.5x8 BCS (6) (fits #8111 or #8112 body)2
8117Tailgate panel/ tailgate retainers (2)/ tailgate mount/ tail light lens (2) (left & right)/ 2.5x8 BCS (4) (fits #8111 or #8112 body)2
8133Mirrors, side, chrome (left & right)/ o-rings (4)/ body clips (4) (fits #8126 series bodies)2
8134Grille, Chevrolet Blazer or K10 Truck (1979)/ grille retainers (4)/ headlight housing (2)/ lens (2)/ 2.6x8 BCS (4)/ 2.5x6 BCS (2) (fits #8126 or 9212 series bodies)2
8139Half shafts, center (external splined) (2)/ pin retainer (4) (plastic parts only)3
8228Axle shaft, front (left)/ drive pin/ cross pin3
8229Axle shaft, front (right)/ drive pin/ cross pin3
8233Cross pin (2)/ drive pin (2) (to rebuild front axle shafts)3
8240XServo mount, 2-speed/ servo mount, T-Lock/ wire clips3
8257Portal drive input gear, front/ drive pin/ cross pin3
8261Piston, damper (red) (4)/ e-clips2
8264Caps & spring retainers, GTS shocks (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))3
8293XGear set, transmission, metal (includes 18T, 30T input gears, 36T output gear, 2x9.8 pins (5))3
8334Mounts, suspension arms (front & rear)/ hinge pin retainers2
8334XMounts, suspension arms, aluminum (blue-anodized) (front & rear)/ hinge pin retainers (12)/ inserts2
8340Suspension pin set, complete (front & rear)2
8349Driveshaft, center, steel/ pin2
8355Driveshaft, center, aluminum / pin2
8355GDriveshaft, center, aluminum / pin, green2
8355RDriveshaft, center, aluminum / pin, red2
8822Roof visor/ visor retainer/ visor lens (2)/ 2.6x6 BCS (3)/ 3x4 GS3
9032Caster blocks (c-hubs), extreme heavy duty, black (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)3
9032-GRAYCaster blocks (c-hubs), extreme heavy duty, gray (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)3
9032GCaster blocks (c-hubs), extreme heavy duty, green (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)3
9032RCaster blocks (c-hubs), extreme heavy duty, red (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)3
9032TCaster blocks (c-hubs), extreme heavy duty, orange (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)3
9032XCaster blocks (c-hubs), extreme heavy duty, blue (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)3
9042Suspension pin set, extreme heavy duty, complete (front and rear) (3x52mm (4), 3x32mm (2), 3x40mm (2)) (for use with #9080 upgrade kit)3
9042XSuspension pin set, extreme heavy duty, complete (front and rear) (hardened steel) (3x52mm (4), 3x32mm (2), 3x40mm (2))/ M2.5x0.45mm NL (8) (for use with #9080 upgrade kit)3
9050Carriers, stub axle, rear, extreme heavy duty, black (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)3
9050-GRAYCarriers, stub axle, rear, extreme heavy duty, gray (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)3
9050GCarriers, stub axle, rear, extreme heavy duty, green (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)3
9050RCarriers, stub axle, rear, extreme heavy duty, red (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)3
9050TCarriers, stub axle, rear, extreme heavy duty, orange (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)3
9050XCarriers, stub axle, rear, extreme heavy duty, blue (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit)3
9058XRebuild kit, steel-splined constant-velocity driveshafts (includes pins and hardware for one axle shaft)4
9059XCross pin (2)/ drive pin (2) (repairs 1 axle shaft)4
9118Mirrors, side, chrome (left & right)/ o-rings (4)/ body clips (4) (fits #9111 body)2
9120Grille, Chevrolet Blazer (1972)/ grille retainers (5)/ headlight housing (2)/ lens (2)/ 2.6x8 BCS (5)/ 2.5x6 BCS (4) (fits #9111 body)2
9121Mirrors, side, chrome (left & right)/ o-rings (4)/ body clips (4) (fits #9112 body)2
9136Caster blocks (c-hubs), extreme heavy duty, black (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit)2
9136-BLUECaster blocks (c-hubs), extreme heavy duty, blue (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit)2
9136-GRAYCaster blocks (c-hubs), extreme heavy duty, gray (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit)2
9136-GRNCaster blocks (c-hubs), extreme heavy duty, green (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit) Caster blocks (c-hubs), extreme heavy duty, green (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit)2
9136-ORNGCaster blocks (c-hubs), extreme heavy duty, orange (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit) Caster blocks (c-hubs), extreme heavy duty, red (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit)2
9136-REDCaster blocks (c-hubs), extreme heavy duty, red (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit)2
9136XCaster blocks (c-hubs), extreme heavy duty, black (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit)3
9137Steering blocks, extreme heavy duty, black (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)3
9137-BLUESteering blocks, extreme heavy duty, blue (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)3
9137-GRAYSteering blocks, extreme heavy duty, gray (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)3
9137-GRNSteering blocks, extreme heavy duty, green (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)3
9137-ORNGSteering blocks, extreme heavy duty, orange (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)3
9137-REDSteering blocks, extreme heavy duty, red (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)3
9142Suspension pin set, extreme heavy duty, complete (front and rear) (2.5x26mm (4), 3x32mm (2), 3x40mm (2), 3x46mm (2)) (for use with #9180, 9181, 9182 upgrade kit)3
9142-BLKSuspension pin set, extreme heavy duty, complete (black, front and rear) (2.5x26mm (4), 3x32mm (2), 3x40mm (2), 3x46mm (2)) (for use with #9180, 9181, 9182 upgrade kit)1
9150Carriers, stub axle, rear, extreme heavy duty, black (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)3
9150-BLUECarriers, stub axle, rear, extreme heavy duty, blue (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)3
9150-GRAYCarriers, stub axle, rear, extreme heavy duty, gray (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)3
9150-GRNCarriers, stub axle, rear, extreme heavy duty, green (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)3
9150-ORNGCarriers, stub axle, rear, extreme heavy duty, orange (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)3
9150-REDCarriers, stub axle, rear, extreme heavy duty, red (left & right)/ 3x31mm hinge pins (2)/ 3x18mm BCS (2) (for use with #9180, 9181, 9182 upgrade kit)3
9754Rebuild kit, constant-velocity driveshaft (includes pins for 2 driveshaft assemblies) (for front driveshafts or #9751 metal center driveshafts)1
10430-SLGRYBattery hold-down (slate gray)/ battery clip/ hold-down post/1
10519Mirrors, side, black (left & right)/ mirror retainers (2)/ spoiler, black/ bumper inserts (left & right)/ 3x10mm BCS (8)/ 2.5x10mm BCS (2) (fits #10515 body)1
13646Suspension pins, 3x36mm1
13647Suspension pins, 3x36mm (steel) (2)/ M2.5x0.45 NL1
13648Suspension pins, 3x31mm (steel) (2)/ M2.5x0.45 NL1
13649Suspension pins, 3x51mm (steel) (2)/ M2.5x0.45 NL1